Floor and Mineral Surface Wax RILAK CERA 0.9 L — protective wax for mineral surfaces, 0.9‑litre container

RILAK CERA is a 0.9‑litre protective wax formulated specifically for mineral surfaces such as stone, concrete and other cementitious substrates. The water‑based wax creates a thin, breathable protective layer that enhances surface appearance while helping to repel dirt and reducing the adherence of contaminants. Designed for floors and vertical mineral finishes in residential and light commercial environments, this product is intended for maintenance and finishing after cleaning or minor restoration work.

Advantages

RILAK CERA provides a clear, low‑sheen protective finish that preserves the natural look of mineral surfaces without forming a heavy film. The formulation improves resistance to soiling and facilitates routine cleaning, while remaining compatible with common masonry and stone materials. Its 0.9‑litre packaging is suitable for small to medium areas and for touch‑up work on vertical surfaces. The product is designed for ease of application and dries to a durable but breathable layer that does not trap moisture within the substrate.

Suitable for

• Interior and covered exterior mineral floors such as stone, terrazzo, and concrete
• Vertical mineral finishes including plastered or rendered walls with mineral composition
• Residential spaces and light commercial areas such as hallways, lobbies, and small retail premises
• Maintenance projects where protection and easier cleaning of mineral surfaces are required

Key specifications

• Formulation: wax dispersion suitable for mineral substrates
• Volume: 0.9 litre container
• Finish: low to medium sheen that maintains natural appearance
• Application methods: brush, roller or low‑pressure sprayer (follow equipment manufacturer recommendations)
• Drying: surface dry within hours depending on temperature and ventilation
• Compatibility: designed for stone, concrete, terrazzo and similar mineral materials

How to use

Ensure the surface is clean, dry and free of dust, grease or loose particles before application. Shake or stir the container gently to homogenise the wax dispersion. Apply an even, thin coat using a clean brush, roller or low‑pressure sprayer, working in sections to avoid lap marks. Allow the first coat to dry fully under adequate ventilation; inspect the appearance and apply a second thin coat if additional protection or sheen is desired. Allow the final coat to cure fully before subjecting the surface to heavy traffic or cleaning.

Usage recommendations

Test the product on a small, inconspicuous area first to verify compatibility and desired appearance. Avoid applying in very cold, hot or humid conditions; follow drying times and ventilation guidance. Use appropriate personal protective equipment and follow local waste disposal regulations for any leftover product or empty containers.