Parquet varnish RILAK ALKYD PARQUET VARNISH 2.7L — alkyd-based wood floor coating, 2.7 L

RILAK ALKYD PARQUET VARNISH 2.7L is an alkyd-based wood floor coating formulated for finishing and protecting interior wooden floors and parquet. Supplied in a 2.7 litre can, the varnish forms a hard, wear-resistant film that seals the wood surface, enhances natural grain and provides long-lasting protection against everyday mechanical stress and foot traffic in residential and light commercial spaces.

Advantages

This alkyd-based parquet varnish creates a durable and cohesive coating that adheres well to properly prepared wood substrates. It improves resistance to abrasion and scuffing while preserving the wood’s natural appearance and depth of color. The product provides reliable sealing properties to limit moisture penetration and makes routine cleaning easier by forming a smooth, easy-to-maintain surface.

Suitable for

• Solid wood and engineered parquet floors in homes
• Wooden stair treads and landings
• Light-commercial interiors such as offices, showrooms and guest rooms
• Interior wooden trim and skirtings that require a durable finish

Key specifications

• Type: alkyd-based varnish for interior wood floors
• Volume: 2.7 litres
• Finish: protective, clear film that preserves wood grain (available sheens depend on product line)
• Application: brush, roller or spray suitable for varnishes of this type
• Drying: cures to a hard film; drying and curing times depend on temperature and ventilation
• Performance: abrasion-resistant, suitable for moderate foot traffic

How to use

Ensure the wooden surface is clean, dry and free from dust, grease or loose coatings. Sand the floor or parquet to an even, smooth profile and remove sanding residue. Stir the varnish thoroughly before use. Apply the product evenly using a suitable brush, short-pile roller or spray equipment in thin coats to avoid runs and puddles. Allow recommended drying time between coats and sand lightly between layers if required by the surface condition. Apply the final coat and allow full curing before subjecting the floor to regular use; curing time increases at lower temperatures and higher humidity.

Usage recommendations

For best results, test the varnish on a small inconspicuous area to confirm appearance and compatibility. Maintain adequate ventilation during application and drying, follow safety instructions on the product label, and use personal protective equipment when spraying. For heavily used or commercial areas consider applying multiple coats and allow sufficient curing time before heavy traffic.