RILAK Lacquer Duokron Gloss 2.7L is a clear gloss varnish formulated for protective and decorative coatings on wood, metal and other properly prepared surfaces. Supplied in a 2.7‑liter container, the varnish forms a transparent, high‑sheen film that enhances the appearance of substrates while providing wear resistance and surface protection. The product is suitable for both interior and exterior applications when applied according to surface preparation and drying recommendations.
Advantages
The lacquer delivers a durable glossy finish that highlights wood grain and the colour of painted metal while offering resistance to mechanical wear. It creates a smooth, transparent layer that protects against moisture and surface abrasion. The composition allows for easy brushing or spraying, resulting in uniform coverage and a consistent high‑gloss appearance. Drying and film formation produce a hard surface that maintains clarity over time.
Suitable for
- Furniture surfaces and wooden cabinetry
- Doors, window frames and interior trim
- Painted metal fixtures and decorative metalwork
- Wooden decking, railings and exterior joinery (with proper preparation)
- Craft and restoration projects requiring a clear high‑gloss topcoat
Key specifications
- Finish: high gloss, transparent
- Volume: 2.7 litres
- Suitable substrates: wood, metal and other prepared surfaces
- Application methods: brush, roller or spray
- Properties: wear resistant, moisture resistant surface film
- Use: interior and exterior when applied on properly prepared surfaces
How to use
Prepare surfaces by cleaning, degreasing and removing loose paint, rust or contaminants. Sand wood or metal substrates to a smooth, even texture and remove dust before application. Stir the varnish thoroughly before use. Apply by brush, roller or spray in thin, even coats, allowing recommended flash‑off and drying times between coats to achieve a uniform glossy film. If necessary, sand lightly between coats for improved adhesion and smoothness. Ensure adequate ventilation during application and curing.
Usage recommendations
For best results, apply at moderate temperatures and low humidity, and always test adhesion and compatibility on a small, inconspicuous area before full application. Follow safety instructions on the container regarding ventilation, personal protective equipment and disposal of excess material.
