Screwdriver Rockforce PH2 x 150 mm with LED illumination, model RF-70120150A

Rockforce PH2 x 150 mm screwdriver RF-70120150A combines a standard Phillips PH2 tip with a 150 mm steel shaft and an integrated LED in the handle to provide targeted illumination when working with PH2 fasteners in low-light or confined spaces. The tool is intended for driving and removing Phillips screws in general maintenance, assembly and electronics tasks where clear visibility of the screw head is important. The integrated LED is powered from the handle and is positioned to illuminate the working area near the tip without requiring a separate light source.

Advantages

The screwdriver provides precise engagement with PH2 screw heads due to its standard tip geometry and a long 150 mm shaft that reaches recessed fasteners. Built-in LED illumination improves visibility in poorly lit environments and narrow spaces, reducing the need for an extra work light. The handle is designed to allow comfortable one-handed operation while the LED location helps align the tip and screw head. The tool is compact and easy to store alongside other hand tools.

Suitable for

• General maintenance and repair tasks that use PH2 screws
• Assembly work where recessed or hard-to-reach Phillips fasteners are present
• Electrical or electronics tasks requiring focused light on the screw head
• Work in dimly lit areas, utility closets or inside machinery enclosures

Key specifications

• Tip type: Phillips PH2 compatible tip for standard cross-head screws
• Shaft length: 150 mm steel shaft suitable for reaching recessed screws
• Illumination: integrated LED in handle positioned to illuminate the working tip area
• Handle: ergonomic design for grip and one-handed use
• Intended use: manual driving and removal of PH2 screws in maintenance, assembly and electronics

How to use

Select the Rockforce PH2 screwdriver for screws specified as PH2. Insert the PH2 tip into the screw head, apply steady axial pressure to maintain engagement and turn the handle clockwise to drive or counterclockwise to remove the fastener. Activate the LED to illuminate the screw head when lighting is poor or when working inside narrow spaces. Keep the shaft aligned with the screw to minimise cam-out and wear on the tip. After use, switch off the LED if applicable and store the screwdriver in a dry tool kit or toolbox.

Usage recommendations

Use the screwdriver only with correctly sized PH2 screws to avoid damage to fasteners and the tip. Replace batteries or service the illumination system according to the maker's instructions to maintain optimal light output. For electronic equipment, observe basic electrostatic precautions and avoid excessive torque that could damage components.