Parallel Printer Cable ROLINE DB25 M - C36 M 4.5 m

The ROLINE Parallel Printer Cable DB25 M - C36 M 4.5 m is a grey, 25‑wire parallel cable designed for connecting computers to Centronics‑type printers. It features a 25‑pole D‑Sub (DB25) male connector on one end and a 36‑pole Centronics (C36) male connector on the other, with a total length of 4.5 metres. The moulded connector casings reduce strain on the cable and the screened design minimises data loss and electromagnetic interference.

Advantages

The cable provides robust electrical contacts with bronze cores and gold plating to ensure reliable signal transmission and corrosion resistance. A continuous screen is connected to the foil shield and both plugs for effective EMI protection. Moulded plastic connector casings and thumbscrews deliver secure mechanical retention and strain relief, reducing the risk of cable breakage in regular use.

Suitable for

• Connecting older parallel printers with a Centronics interface to PCs or legacy devices with a DB25 parallel port
• Environments requiring a screened parallel connection to reduce electromagnetic interference
• Workstations where a 4.5 m cable length is needed for flexible printer placement

Key specifications

• Cable type: Parallel printer cable
• Connectors: DB25 male (25‑pole D‑Sub) to C36 male (36‑pole Centronics)
• Wires: 25 lines
• Length: 4.5 m
• Shielding: Foil screen connected to shield line and both plugs
• Contacts: Bronze with gold plating
• Connector casing: Moulded plastic with strain relief; thumbscrews for fastening
• Brand / MPN / EAN: ROLINE / 11.01.1045 / 7611990115006

How to use

Align the 25‑pole DB25 male connector with the DB25 parallel port on the computer or host device and fasten the thumbscrews to secure the connection. Align the 36‑pole Centronics male connector with the printer’s Centronics socket and press firmly until it seats; use the built‑in retention mechanism or thumbscrews if available on the printer. Ensure both ends are fully seated and the cable is routed without sharp bends to preserve the moulded strain relief.

Usage recommendations

For reliable operation, route the cable away from strong sources of electromagnetic interference (large motors, unshielded power cables). Avoid excessive bending at the connector entry points and do not put heavy loads on the cable. Inspect contacts periodically for contamination; clean only with appropriate contact cleaners if necessary.