RS232 Cable ROLINE F - F 1.8 m

The ROLINE RS232 Cable F - F 1.8 m is a 1.8 m grey serial cable with two 25‑pole D‑Sub (DB‑25) female connectors. It provides a direct 1:1 connection of all 25 lines and a screened signal conductor tied to the cable foil and both connector housings to reduce electromagnetic interference. The moulded connector casings include integrated strain relief and hand‑tightening screws; contacts are bronze with gold plating for reliable conductivity.

Advantages

This RS232 cable offers complete 25‑wire pin‑to‑pin wiring, effective screening to prevent data loss and EMI, and robust connector construction with moulded strain relief. Gold‑plated bronze contacts and hand locking screws ensure stable, long‑term serial connections.

Suitable for

• Connecting a computer to a switchbox or device with DB‑25 serial ports
• Linking printers, modems and other RS232‑compatible equipment
• Point‑to‑point serial communication requiring full 25‑pin wiring

Key specifications

• Type: RS232 cable, D‑Sub 25 female to female
• Length: 1.8 m
• Wiring: 25 lines connected 1:1
• Shielding: foil screen with screened drain tied to connectors
• Contacts: bronze with gold coating
• Connectors: moulded casing with strain relief and hand locking screws
• Colour: grey
• Brand / MPN / EAN: ROLINE / 11.01.3718 / 7611990115211

How to use

Align each DB‑25 female connector with the corresponding male port on the devices to be connected, then engage the hand locking screws to secure the connection. Ensure the cable is routed without sharp bends or excessive tensile stress to protect the moulded strain relief. The screened drain is already connected to both connector housings for optimal grounding and interference suppression.

Usage recommendations

Use this cable for short‑range serial links (up to typical RS232 distances) between RS232‑equipped devices. Avoid exposing the cable to strong mechanical strain, liquids, or extreme temperatures. For installations requiring panel mounting or fixed connectors, verify connector gender and pinout compatibility before deployment.