DisplayPort cable ROLINE 14.01.3502 DP to DP, 20 m, black, 4.8 mm diameter

ROLINE 14.01.3502 is a 20 m active optical DisplayPort cable (AOC) with DisplayPort connectors on both ends, designed to connect laptops, ultrabooks or desktops to monitors, TVs or projectors. It supports very high resolutions up to 10240 x 4320 at 60 Hz and delivers a maximum bandwidth of 54 Gbit/s for reliable screen transmissions without additional software or external power supplies.

Advantages

The cable uses optical fibres with an integrated copper conductor for power, resulting in a thinner outer diameter (approximately 4.8 mm) than comparable all-copper cables. Its hardware-based solution requires no drivers, and the plug design helps prevent accidental disconnection from the DisplayPort socket. The cable supports the DisplayPort standard to transmit high-resolution video at up to 10K @60 Hz.

Suitable for

• Connecting laptops, ultrabooks or desktop PCs to external monitors
• Driving high-resolution displays, TVs or projectors for presentations and media playback
• Workstations or home setups requiring long cable runs (up to 20 m) with minimal signal loss

When it may not be suitable

As an active optical cable, this product is designed primarily for video transmission; it is not intended as a general-purpose USB or data cable. Devices that require DisplayPort features not supported by the cable’s implementation, or setups that need separate power delivery over the cable, may need alternate solutions.

Key specifications

• Cable type: Active Optical Cable (AOC) with integrated copper power conductor
• Length: 20 m
• Connector type: DisplayPort male to DisplayPort male
• DisplayPort standard compliance: DP 2.1 (supports up to 10240 x 4320 @60 Hz)
• Maximum bandwidth: 54 Gbit/s (UHBR13.5)
• Outer diameter: approx. 4.8 ±0.2 mm
• Colour: Black

How to use

Connect one DisplayPort plug to the source device (laptop, ultrabook or PC) and the other plug to the display device (monitor, TV or projector). The cable is a plug-and-play hardware solution that requires no software installation; once connected, select the appropriate input on the display and configure resolution and refresh rate in the operating system or graphics control panel if necessary.

What to consider before purchase

• Confirm both source and display have DisplayPort connectors and support the desired resolution and refresh rate
• Ensure a 20 m cable run is appropriate for your installation and routing needs
• Check if your setup requires power delivery or other features not provided by the cable

Usage recommendations

For best results, use in straight runs without tight bends and avoid sharp kinks; set the display to the intended resolution and refresh rate after connection to utilize the cable’s full bandwidth for high-resolution video.