Filament ROSA-PLAST Rosa3D Refill PLA Magic Silk 1.75 mm 1 kg Mistic Green

ROSA-PLAST Rosa3D Refill PLA Magic Silk 1.75 mm 1 kg in Mistic Green is a PLA filament designed for FDM/FFF 3D printers that accept 1.75 mm filament. The material delivers a silk-like glossy surface with consistent extrusion and dimensional stability, suitable for decorative prints, prototypes and visual parts. The 1 kg spool provides enough material for medium to large projects and is wound for reliable feeding in common hobby and prosumer printers.

Advantages

This PLA filament offers a silk-type finish that enhances surface gloss and light reflection without special post-processing. It runs on standard 1.75 mm hotends and prints at typical PLA temperature ranges, providing good layer adhesion and low warping. The filament is suitable for detailed models and visual components where a smooth, shiny appearance is required, and its consistent diameter minimizes print failures related to inconsistent extrusion.

Подходит для

• Декоративные модели и фигурки
• Визуальные макеты и прототипы
• Бытовые предметы и держатели
• Демонстрационные и презентационные образцы

Key specifications

• Material: PLA (polylactic acid) with silk-effect additive
• Diameter: 1.75 mm
• Net weight: 1 kg
• Finish: Magic Silk — glossy, silk-like surface
• Recommended printer type: FDM/FFF with 1.75 mm filament support
• Typical print characteristics: good layer adhesion, low warping, consistent extrusion

How to use

Load the filament into a compatible FDM/FFF printer designed for 1.75 mm PLA. Select a nozzle temperature within the typical PLA range (commonly 190–220 °C) and a heated bed temperature if used (often 0–60 °C depending on adhesion method). Print at moderate speeds to preserve the silk finish and enable good layer bonding. Store the spool in a dry environment or sealed container with desiccant when not in use to prevent moisture absorption that can affect print quality.

Usage recommendations

For best surface quality, use a well-tuned extrusion multiplier and calibrated flow settings, moderate print speeds, and minimal cooling where needed to retain the glossy silk effect. Use common adhesion methods (blue tape, glue stick, or PEI sheet) as appropriate for your printer and part geometry.