SANHA press fitting elbow 90° female thread 15 x 1/2 inch

SANHA press fitting elbow 90° female thread 15 x 1/2 inch is a compact press-join elbow with an internal thread designed to connect press-fit copper, stainless steel or multilayer pipes to threaded components. The fitting provides a 90° change of direction while offering a sealed transition from press-fit piping systems to fixtures, valves or other threaded parts used in heating, potable water and sanitary installations.

Advantages

The fitting enables reliable, permanent joints using standard press tools and contour jaws compatible with SANHA press systems. Its female thread offers secure mechanical connection to threaded components while the press end ensures a fast, solder-free installation. The compact design facilitates installation in confined spaces and reduces the need for additional adapters. Manufactured to meet common plumbing system requirements, it supports long-term operation in domestic and commercial installations.

Suitable for

• Changing pipe direction by 90° in plumbing and heating systems
• Transitioning from press-fit pipework to threaded valves, fixtures or meters
• Use in potable water, central heating and sanitary installations
• Installation in restricted or tight-access spaces

Key specifications

• Connection types: press-fit end and female (internal) threaded end
• Angle: 90° elbow
• Press end nominal pipe size: 15 mm
• Thread size: 1/2 inch internal thread
• Compatible pipe materials: copper, stainless steel, multilayer
• Intended applications: potable water, heating and sanitary systems

How to use

Prepare the pipe by cutting squarely and deburring the cut end. Slide the press fitting onto the prepared pipe until it seats fully on the stop. Position the press tool with the correct contour jaw over the fitting until it aligns with the press mark or designated pressing zone. Activate the press tool to make the joint according to the tool manufacturer's instructions. Threaded components can then be engaged into the female thread using appropriate sealant or tape on the male thread if required for the application. Perform a pressure test of the completed system following installation standards.

Usage recommendations

Use only compatible press tools and jaw contours specified for SANHA press fittings. Ensure threads are clean and use suitable thread sealant or PTFE tape where required. Follow local codes and standards for potable water and heating installations and conduct pressure testing before putting the system into operation.