Stainless steel transition fitting SANHA NIROSAN D22 x 3/4" — threaded connector

The SANHA NIROSAN stainless steel transition fitting D22 x 3/4" is a threaded connector designed to join a 22 mm stainless or copper pipe to a 3/4" female threaded port. Constructed from corrosion‑resistant stainless steel, the fitting provides a durable metal-to-thread transition suitable for potable water, heating and industrial systems. The product is intended to create a secure mechanical connection where a threaded fixture or appliance must be joined to a smooth bore pipe.

Advantages

This stainless steel transition fitting offers long-term corrosion resistance and mechanical strength compared with non‑metallic alternatives. Its threaded end enables a tight connection to standard 3/4" female fittings without additional adapters, and the 22 mm pipe connection provides a reliable, leak‑resistant joint when installed correctly. The metal construction resists temperature variations and chemical exposure common in domestic and light industrial installations.

Suitable for

• Connecting 22 mm pipework to appliances, valves or fixtures with 3/4" female threads
• Potable water distribution and service lines
• Heating systems and radiator connections requiring a metal transition
• Light industrial applications where corrosion resistance and threaded connections are needed

Key specifications

• Material: corrosion‑resistant stainless steel
• Pipe connection size: 22 mm
• Threaded connection: 3/4" female thread (threaded connector)
• Application: potable water, heating, industrial installations
• Connection type: metal to female threaded port

How to use

Prepare the 22 mm pipe by cutting squarely and deburring the internal and external edges. Ensure the female 3/4" thread is clean and undamaged. Slide the fitting onto the pipe end according to the pipe system's joining method (for example push‑fit, soldering, or compression as applicable for the selected variant) and tighten the threaded connection to the mating component using appropriate tools and recommended torque values for stainless steel fittings. Verify alignment and check for leaks under system pressure after installation.

Usage recommendations

Use appropriate thread sealant or PTFE tape on the 3/4" male thread if required by the installation practice; avoid over‑tightening to prevent damage to threads. Select compatible stainless or copper pipe materials and follow local plumbing codes and temperature/pressure ratings for potable water and heating systems.