Optical Tamper Detector SATEL SX6-TO — tamper sensor for security devices, model SX6-TO

The SATEL SX6-TO is an optical tamper detector designed to monitor and signal physical interference with security devices and enclosures. The device provides a dedicated tamper input for alarm systems and is intended for installation where detection of unauthorized opening, displacement or alteration of housings is required. The SX6-TO integrates with control panels and security installations to add a layer of enclosure protection without affecting normal device operation.

Advantages

The optical tamper detector uses a non-mechanical sensing method, which reduces wear and maintenance compared with mechanical switches. Its compact form factor allows installation inside a variety of housings and control cabinets. The output is designed to interface with common alarm system inputs, enabling fast signaling of tamper events. Installation and wiring are straightforward, which shortens setup time and supports reliable, continuous monitoring of device enclosures.

Suitable for

• Protection of alarm control panels and security system enclosures
• Monitoring of junction boxes, cabinets and communication racks
• Detection of unauthorized access to power supplies and battery compartments
• Integration into building security and access control systems

Key specifications

• Optical tamper detection principle for non-contact sensing
• Designed for installation inside enclosures and control cabinets
• Compatible with typical alarm system tamper inputs
• Compact physical dimensions suitable for confined spaces
• Low maintenance operation due to absence of mechanical contacts

How to use

Install the SX6-TO inside the enclosure in a position where it monitors the opening or movement of the cover or panel. Connect the detector output to the designated tamper input of the alarm control panel following the panel manufacturer’s wiring recommendations. Verify correct operation by testing the tamper input from the control panel after installation and secure the device to avoid inadvertent movement. Ensure the detector is powered as required by the security system and that wiring is routed to minimize the risk of accidental damage.

Usage recommendations

Place the detector to directly monitor the most likely access points of the enclosure and avoid locations where dust, moisture or direct light sources could interfere with optical sensing. Periodically test the tamper function via the control panel and inspect mounting to ensure continued reliable operation.