Schneider Electric ClimaSys Forced Ventilation System, 230V, 300m3/h, IP54, with Outlet Grille and G2 Filter

The Schneider Electric ClimaSys forced ventilation system is a high-performance cooling solution engineered for electrical enclosures. Operating at 230V, this unit provides an efficient airflow of 300m3/h, ensuring that sensitive electronic components remain within their optimal temperature range. The system is supplied as a complete kit, including an outlet grille and a G2 filter, which helps prevent dust and debris from entering the enclosure while maintaining consistent cooling performance.

Advantages

This ventilation system stands out due to its robust construction and reliable thermal management capabilities. The IP54 protection rating ensures that the unit is well-protected against dust ingress and water splashes, making it suitable for demanding industrial environments. The inclusion of both front and rear protective grilles enhances safety, while the use of high-quality thermoplastic materials ensures durability and longevity. Its design allows for straightforward installation and maintenance, providing a cost-effective way to extend the lifespan of internal electrical equipment.

Suitable for

• Cooling electrical control panels and automation cabinets
• Maintaining stable temperatures for sensitive electronic devices
• Industrial environments requiring dust and splash protection
• Applications where reliable airflow is critical for system uptime

When it may not be suitable

This ventilation system is not designed for outdoor environments exposed to direct heavy rain or extreme weather conditions, as the IP54 rating only provides limited protection against water splashes. It is also not intended for use in environments with high concentrations of fine chemical particles or oil mists that could clog the G2 filter rapidly.

Key specifications

• Airflow capacity: 300 m3/h at 50 Hz, 350 m3/h at 60 Hz
• Power supply: 230V, 50/60 Hz
• Power consumption: 36 W at 50 Hz, 37 W at 60 Hz
• Protection rating: IP54
• Cut-out dimensions: 223 x 223 mm
• External dimensions: 268 x 248 x 116 mm
• Material: Thermoplastic (ASA PC), Grey RAL 7035

How to use

To install the ClimaSys ventilation system, first prepare the enclosure by cutting an opening of 223 x 223 mm in the panel wall. Secure the fan unit and the outlet grille into the cut-out using the provided mounting hardware. Connect the power supply to the unit using the integrated faston terminals. Ensure that the G2 filter is correctly seated within the housing to maintain the IP54 seal. Regularly inspect the filter for dust accumulation and replace it as needed to ensure unobstructed airflow.

What to consider before purchase

• Verify that the enclosure has sufficient space for the 116 mm depth of the unit.
• Ensure the power supply matches the 230V requirement.
• Check if the G2 filter level is sufficient for your specific environmental air quality.
• Confirm that the cut-out dimensions are compatible with your existing panel layout.

Usage recommendations

For optimal performance, it is recommended to clean or replace the G2 filter periodically based on the dust levels in your facility. Always ensure that the air intake and exhaust paths are not obstructed by internal wiring or components to allow for maximum cooling efficiency.