Air Conditioner SENCOR SAC MT1803CH — model SAC MT1803CH, room cooling/heating unit

The SENCOR SAC MT1803CH is a compact room air conditioner designed for cooling and heating indoor spaces. It provides inverter operation with a cooling capacity of 18,000 BTU/h and heating capacity of 17,000 BTU/h. The unit is intended for residential or small office use and includes features such as Wi‑Fi control, a built‑in condensate tank with drain outlet, and a complete set for hot air extraction and window sealing.

Advantages

The inverter motor delivers more stable temperature control and improved energy efficiency compared with fixed‑speed compressors. Multiple operating modes (Cool, Dry, Fan, Heat), three fan speeds and a wide temperature range (17–30 °C) allow flexible climate control. Built‑in mobility features — four travel wheels and integrated handles — plus remote control and touch panel with display simplify operation. The small charge of ecological refrigerant R290 and a 24‑hour timer add practical convenience.

Suitable for

• Cooling or heating living rooms and bedrooms
• Small offices and home workspaces
• Spaces with a usable area around 72–78 m² or volume of about 185–202 m³ under Central European conditions

When it may not be suitable

This mobile air conditioner is not a built‑in HVAC solution and may be less efficient in very large open areas or in buildings with poor insulation. For rooms significantly larger than the indicated area or for permanent central heating needs, a dedicated fixed installation or a larger capacity system could be more appropriate.

Key specifications

• Cooling capacity: 18,000 BTU/h
• Heating capacity: 17,000 BTU/h
• Operating modes: Cool / Dry / Fan / Heat
• Fan speeds: 3 (High / Medium / Low)
• Temperature range: 17–30 °C
• Cooling air volume: 480 / 400 / 360 m³/h (High / Medium / Low)
• Applicable area: 72–78 m²
• Applicable space (approx.): 185–202 m³ (Central Europe conditions)
• Dehumidification capacity: 70 l/day
• Condensate tank volume: 1 l with drain outlet
• Refrigerant: R290, 0.295 kg
• Controls: Touch control panel with display, remote control with LCD, Wi‑Fi (Sencor HOME app)
• Timer: 24‑hour ON/OFF
• Mobility: 4 travel wheels and integrated handles

How to use

Place the unit on a flat, stable surface near a window or outlet where the included hot air extraction hose can be installed and sealed. Connect power according to the product manual, set the desired mode and temperature via the touch panel, remote control or Sencor HOME app. Use the timer and sleep mode for scheduled or quieter, energy‑saving operation. Empty the condensate tank via the drain outlet if the internal tank fills during dehumidification or continuous use.

What to consider before purchase

• Measure the room area and volume to verify compatibility with the indicated applicable area (72–78 m² / ~185–202 m³).
• Ensure there is a suitable window or outlet location for the hot air extraction kit and adequate ventilation.
• Check electrical supply compatibility and recommended power requirements in the product manual.

Usage recommendations

For best results use the unit in rooms close to the specified area and follow the manufacturer’s instructions for installation of the exhaust hose and window sealing. Regularly check and clean filters and empty the condensate tank as needed to maintain performance.