Audio cable ShiverPeaks 30832-15 — 3.5mm stereo jack to 2 RCA, 1.5 m

ShiverPeaks 30832-15 is a 1.5 m audio cable with a 3.5 mm stereo jack on one end and two RCA (phono) plugs on the other. It transmits left and right analog line-level audio signals and is intended to connect devices with a headphone or line output — such as smartphones, tablets and laptops — to stereos, amplifiers, receivers and other AV equipment that accept RCA inputs. The cable length provides a balance between reach and signal integrity for typical home audio and portable setups.

Advantages

This audio cable offers a straightforward analog connection with standard 3.5 mm and RCA interfaces for broad compatibility with consumer electronics. The 1.5 m length reduces cable clutter while giving enough distance between source and playback equipment. Designed for line-level signals, the cable preserves stereo separation for left and right channels and is suitable for both playback and basic recording or signal routing tasks where unbalanced RCA connections are required.

Suitable for

• Connecting smartphones, tablets or laptops to home stereos and amplifiers
• Feeding line-level audio into AV receivers or powered speakers
• Temporary setups for small recording tasks or audio routing
• Connecting portable media players to TVs or soundbars with RCA inputs

Key specifications

• Connector A: 3.5 mm stereo jack (TRS)
• Connector B: 2 × RCA (left and right)
• Cable length: 1.5 m
• Signal type: analog stereo, line level
• Configuration: unbalanced stereo

How to use

Insert the 3.5 mm stereo plug into the headphone or line output of the source device. Connect the red and white (or red and black) RCA plugs to the corresponding right and left RCA inputs on the receiving device, matching colors or input labels. Set source and playback device volumes to a low or medium level and adjust gradually to the desired listening level to avoid clipping or sudden volume spikes. For recording, select the appropriate input on the recording interface or device and monitor levels as usual.

Usage recommendations

Place the cable away from power cords and sources of electromagnetic interference to minimize hum and noise. Use the shortest practical cable length to reduce potential signal degradation, and ensure connectors are fully seated for reliable contact. If ground loop hum appears, consider using ground loop isolators or balanced connections where available.