Toslink Optical Audio Cable ShiverPeaks 69004-10 10 m 4.0 mm

Toslink Optical Audio Cable ShiverPeaks 69004-10 is a 10 m digital audio interconnect with a 4.0 mm optical fiber diameter and Toslink connectors at both ends. It is designed to transmit stereo and multichannel PCM/Digital Audio signals between televisions, soundbars, AV receivers and other multimedia devices, providing an electrical‑isolation optical link for home theatre, Hi‑Fi setups and AV installations that require a reliable optical connection.

Advantages

The ShiverPeaks Toslink cable offers consistent digital signal transmission without electromagnetic interference thanks to its optical design. Its 4.0 mm fiber diameter provides a balance of flexibility and signal integrity over the 10 m length, and standard Toslink connectors ensure compatibility with a wide range of consumer audio equipment.

Suitable for

• Connecting TVs to soundbars or AV receivers
• Home theatre and Hi‑Fi audio setups
• Multichannel PCM/Digital Audio transmission in living rooms and media rooms

When it may not be suitable

This optical cable carries digital audio only and does not support analog audio signals or HDMI video/data transmission. It is not suitable where a bi-directional data channel, HDMI‑CEC control or networked audio via Ethernet is required.

Key specifications

• Cable type: Optical (Toslink) audio cable
• Length: 10 m
• Optical fiber diameter: 4.0 mm
• Connectors: Toslink (both ends)
• Supported signals: Stereo and multichannel PCM/Digital Audio

How to use

Insert the Toslink connector firmly into the optical port of your source device (for example a TV or CD player) and the other end into the input of the receiving device (for example a soundbar or AV receiver). Ensure the connector tips remain clean and free of dust to maintain signal quality. Route the cable without sharp bends and allow gentle curves to avoid stressing the fiber.

What to consider before purchase

• Confirm both devices have Toslink/optical audio ports
• Verify 10 m length is sufficient for your setup and cable routing
• Optical cables transmit digital audio only (no analog audio or HDMI signals)

Usage recommendations

For best performance keep the connector ends covered when not in use, avoid tight bends along the 10 m run, and check device audio output settings to ensure optical output is enabled and set to a compatible format (PCM or supported multichannel format).