Dreame vacuums for fast and efficient cleaning!
In cart {{totalProductsCount}} item(s)
Your cart is empty
SATA III cable ShiverPeaks 78246-1.0 1 m, supports 3 Gb/s and 6 Gb/s
SATA III cable ShiverPeaks 78246-1.0 is a 1 meter internal PC data cable that supports both 3 Gb/s and 6 Gb/s link speeds. It provides a standard SATA plug-to-plug connection with metal retention clips for secure attachment to drives and motherboard connectors. Intended for internal use in desktop and server systems, the cable enables data transfer between SATA-compatible storage devices such as HDDs, SSDs and optical drives and host controllers or motherboard ports.
The cable supports legacy 3 Gb/s and modern 6 Gb/s SATA link rates, allowing compatibility with a wide range of SATA devices. Its 1.0 m length offers flexibility for routing inside various PC chassis while keeping signal integrity for typical internal installations. Metal retention clips on the plugs help ensure stable mechanical connection and reduce the risk of accidental disconnection during maintenance or transport.
Route the SATA III cable inside the PC chassis from the motherboard or controller SATA port to the SATA device connector, taking care to avoid tight bends and sharp edges. Align the keyed SATA plug with the device and motherboard connectors and press until the metal retention clip engages. Ensure the system is powered off and disconnected from mains power before connecting or disconnecting the cable to prevent data corruption or electrical damage. After installation, power on the system and verify that the storage device is detected by the BIOS/UEFI or operating system.
For reliable operation, keep the cable length and routing clear of fans and high-voltage wiring, avoid excessive bending radii, and replace the cable if connectors show wear or if data errors are observed. Use the cable for internal connections only; it is not intended for external or hot-plug environments beyond standard SATA device support.
{{highlightedFeature.featureTitle}}:
{{getProductFeatureValueById(product, highlightedFeature.featureId)}}
{{ productComparisonGenerationError }}