T-adapter cable set ShiverPeaks PV4, 2-to-1, 6 mm² conductors, red/black, 30 cm

The ShiverPeaks PV4 T-adapter cable set is a 2-to-1 low-voltage power adapter with 6 mm² conductors and a 30 cm overall length, supplied in red and black for clear polarity identification. It is designed to join or split power lines where a compact, color-coded connection is required, for example in audio/video systems, automotive installations or small-scale solar setups. The cable set provides a simple, flexible means to combine two cables into a single feed or to branch a feed to two circuits while maintaining consistent conductor size and visible polarity.

Advantages

The PV4 T-adapter features 6 mm² copper conductors suitable for moderate current loads while keeping a compact form factor. Clear red and black insulation reduces wiring errors and simplifies installation. The 30 cm length offers enough reach for connections inside equipment bays, vehicle compartments or junction boxes without excess cable bulk. Its straightforward two-to-one configuration reduces the need for additional connectors and helps maintain a tidy wiring layout.

Suitable for

• Audio and video system power distribution where two lines must be combined or branched
• Automotive 12 V wiring tasks such as accessory feeds or fused distribution
• Small solar or off-grid DC installations needing compact, color-coded joins
• Workshop and DIY electrical projects with moderate current requirements

When it may not be suitable

This adapter is intended for low-voltage DC applications and moderate current levels; it is not designed for high-voltage mains distribution or heavy-duty industrial power where higher conductor cross-sections and certified connectors are required. If your application requires sealed, weatherproof or vibration-resistant connections for outdoor or harsh environments, additional protection or a different connector type may be necessary.

Key specifications

• Conductor cross-section: 6 mm²
• Configuration: 2-to-1 T-adapter (two inputs to one output)
• Length: 30 cm total cable length
• Insulation colors: red and black for polarity identification
• Intended voltage range: low-voltage DC applications (typical 12 V systems)

How to use

Identify the positive and negative conductors by color and route the cables to the connection points. Ensure all power sources are switched off and any fuses are removed before making connections. Connect the two input conductors to the single output conductor according to the desired configuration (combining or branching), making secure mechanical joints or soldered connections as appropriate for the application. Verify continuity and correct polarity before reapplying power and secure the assembly to prevent strain on the terminals.

What to consider before purchase

• Confirm conductor cross-section (6 mm²) is sufficient for the expected current load
• Check that the 30 cm cable length matches installation reach and routing needs
• Ensure the adapter’s non-weatherproof design is suitable for the intended environment
• Verify compatibility with existing connectors or terminals in your system

Usage recommendations

Use the ShiverPeaks PV4 T-adapter in indoor or protected low-voltage DC installations. For vehicle or outdoor use, protect connections from moisture and vibration with heat shrink, terminal boots or sealed junction boxes. Match conductor size to current requirements and use appropriate fusing on combined feeds to avoid overloads.