ShiverPeaks USB-A to RJ45 LAN Adapter Cable 1 Gbps, USB Type A plug to RJ45, Aluminum, Black, 15 m

The ShiverPeaks USB-A to RJ45 LAN Adapter Cable provides a 1 Gbps wired Ethernet connection through a USB Type A plug to an RJ45 connector. Designed as a passive cable for hosts that support USB-to-Ethernet adapters, this 15 m black cable features aluminum shielding to reduce electromagnetic interference and maintain signal integrity over a longer distance. It is intended to extend wired network access for desktops, laptops or other USB-A equipped devices when a direct Ethernet port or short adapter cable is not practical.

Advantages

This 15 m adapter cable combines the convenience of a USB Type A connector with a full-size RJ45 plug to achieve gigabit Ethernet speeds where the host supports passive USB-to-Ethernet functionality. Aluminum shielding along the cable length helps minimize interference from nearby electronics and cabling, contributing to more stable network performance. The black finish and durable build are suitable for office or home installations where a long, discreet cable run is required.

Suitable for

• Extending wired Ethernet access from a USB-A host to a network wall jack or switch up to 15 m away
• Desktop or laptop setups that lack a built-in RJ45 port but support USB-to-Ethernet adapters
• Temporary or semi-permanent installations where a long, shielded connection is needed without adding active adapters

When it may not be suitable

This cable is passive and requires that the computer or device supports USB-to-Ethernet adapter functionality through its USB-A port; it will not add Ethernet capability to hosts that lack appropriate driver or hardware support. It is not an active powered adapter or standalone Ethernet interface — if the host does not recognise USB-to-Ethernet devices, a powered or chipset-based adapter will be necessary. Additionally, while aluminum shielding reduces interference, extremely noisy electromagnetic environments may still affect link stability.

Key specifications

• Data rate: up to 1 Gbps (gigabit Ethernet)
• Connectors: USB Type A plug to RJ45 plug
• Cable length: 15 m
• Shielding: aluminum shielding for reduced electromagnetic interference
• Color: black

How to use

Connect the USB Type A plug to a USB-A port on a computer or device that supports USB-to-Ethernet adapters. Plug the RJ45 connector into a network port such as a wall jack, switch or router. Verify that the host recognises the Ethernet connection and that any required drivers are installed. For optimal performance, avoid sharp bends and keep the cable away from high-power electrical sources and large motors that can introduce interference. If the host does not detect the network interface, check driver support or consider a chipset-based USB-to-Ethernet adapter.

What to consider before purchase

• Confirm that your computer or device supports USB-to-Ethernet functionality via a USB-A port and has required drivers.
• Ensure a 15 m cable length meets your routing and signal requirements for the installation.
• Note that this is a passive cable solution and not an active powered adapter; compatibility depends on the host.

Usage recommendations

For best results, route the cable away from sources of heavy electrical noise, secure it to avoid stress on connectors, and verify driver support on the host system before deploying the cable in a permanent installation.