Electric Strike Siemens XS00U-C HARTTE series 12–24V AC/DC low-current with latch slip

Siemens electric strike XS00U-C from the HARTTE series is a low-current door strike designed for 12–24V AC/DC operation with a latch slip (withdrawn latch) function. Intended for access control and door release systems, it provides electrically controlled unlocking while allowing the mechanical latch to move freely. The unit is suitable for applications where low power consumption and reliable remote release are required, and it integrates into existing access control installations that support 12–24V AC or DC supply.

Advantages

The XS00U-C offers low current draw for energy-efficient operation and compatibility with both AC and DC power sources in the 12–24V range. Its latch slip (withdrawn latch) function enables the latch to retract or slip when the strike is activated, reducing stress on door hardware and permitting manual operation without additional mechanical modifications. Designed by a known manufacturer, the strike provides consistent electrical release performance and can be installed in standard strike cavities for many commercial and residential doors.

Suitable for

• Office and commercial entry doors with access control systems
• Residential doors requiring remote release and low power consumption
• Doors where latch slip/walk-by opening is needed to reduce mechanical wear
• Retrofit installations that accept standard electric strikes and 12–24V supply

Key specifications

• Operating voltage: 12–24 V AC/DC
• Type: low-current electric strike with latch slip (withdrawn latch)
• Function: electrically controlled unlocking while permitting mechanical latch movement
• Intended application: access control and door release systems
• Compatibility: designed for standard strike openings on compatible doors

How to use

Install the XS00U-C electric strike into the door frame strike cavity according to the manufacturer's mechanical and electrical installation guidelines, ensuring the chosen power supply provides 12–24V AC or DC and adequate wiring polarity where applicable. Connect the strike to the access control or release circuit so that an authorized signal energizes the unit and allows the latch to slip or withdraw. Verify mechanical alignment with the door latch and test operation both electrically and manually to ensure reliable release and secure latching when de-energized.

Usage recommendations

Use a regulated 12–24V AC or DC supply sized to accommodate the strike's low current draw and any additional access control devices. Confirm compatibility with the door frame and latch dimensions before installation, and perform periodic checks of alignment and wiring to maintain reliable operation.