Double-sided Mounting Tape SILA 19 mm x 1.5 m for Bathroom, model SIL732289/ALL

SILA double-sided mounting tape 19 mm x 1.5 m (model SIL732289/ALL) is a narrow, water-resistant adhesive roll created for fixing lightweight bathroom fixtures and trims without drilling. The product delivers a strong, double-sided bond on smooth, clean surfaces and comes as a 1.5 metre roll with a 19 mm width for precise, discreet mounting of hooks, seals, decorative strips and small panels in wet-prone indoor environments.

Advantages

The tape provides immediate tack and a reliable double-sided bond that allows quick, tool-free installation. Its 19 mm width enables accurate placement in narrow joints and along edges while the 1.5 m length supplies enough material for multiple small fittings. The adhesive is formulated to withstand humidity typical of bathroom conditions and to adhere well to non-porous surfaces such as tiles, glass and sealed metals.

Suitable for

• Mounting small bathroom accessories such as hooks, towel bars’ end brackets, and soap dishes on tiles or glass
• Fixing seals, trim strips and decorative mouldings along walls and shower enclosures
• Temporary or semi-permanent attachment of lightweight panels, plastic profiles and cable clips in wet-prone indoor areas
• Tool-free installations where narrow adhesive width is required for a neat finish

When it may not be suitable

This mounting tape is intended for lightweight fixtures and may not support heavy or load-bearing items. It performs best on clean, dry, smooth and non-porous surfaces; adhesion will be reduced on rough, dusty, unprimed or porous materials. It is not formulated for permanent outdoor exposure or for applications requiring structural strength comparable to mechanical fasteners.

Key specifications

• Width: 19 mm
• Length: 1.5 m roll
• Type: double-sided adhesive tape
• Primary use: indoor, bathroom and wet-prone rooms
• Compatible surfaces: smooth non-porous surfaces such as glazed tiles, glass and sealed metal

How to use

Ensure the mounting surface is clean, dry and free of dust, grease or silicone residue. Cut the required length from the roll, remove the protective liner from one side and press the tape firmly onto the object to be mounted. Remove the remaining liner, position the object against the receiving surface and apply even pressure along the full length of the tape for several seconds to promote adhesion. Allow the bond to set per normal ambient conditions before applying load; avoid heavy stress on the bond immediately after installation.

What to consider before purchase

• Intended load: suitable for lightweight fixtures, not for heavy or load-bearing applications
• Surface condition: best adhesion on clean, dry, smooth and non-porous surfaces
• Environment: designed for indoor use in wet-prone rooms, not for prolonged outdoor exposure
• Size and quantity: 19 mm width and 1.5 m length — check if the roll length meets your project needs

Usage recommendations

For optimal results, test the tape on a small inconspicuous area first and wait at least 24 hours before subjecting mounted items to regular use. Avoid applying on freshly painted surfaces until paint is fully cured and ensure surfaces are degreased for best adhesion.