Cutting Disc Silver 230×22.2 mm, 1.8 mm thickness – Silver

Metal cutting disc Silver with a diameter of 230×22.2 mm and a cutting thickness of 1.8 mm is designed for cutting steel and other ferrous metals with angle grinders that accept 22.2 mm bore discs. The disc is intended for workshop and construction applications where straight, precise cuts are required. It is compatible with standard handheld angle grinders and stationary cutters that accept this size and mounting configuration. Use the disc only within the manufacturer's recommended speed limits and always with appropriate protective equipment.

Advantages

The cutting disc combines a thin 1.8 mm kerf for reduced material loss and faster cutting with a robust abrasive formulation suitable for ferrous metals. Its 230 mm diameter provides a good balance between cutting depth and accessibility for typical metalworking tasks. The standard 22.2 mm bore ensures compatibility with most angle grinders on the market. The construction aims to provide consistent cutting performance and longish service life when used correctly and not overloaded.

Suitable for

• Cutting steel sheets, profiles, rods and rebar
• Workshop metal fabrication and trimming
• Construction site metal cutting tasks
• Maintenance and repair works involving ferrous materials

Key specifications

• Disc diameter: 230 mm
• Bore (arbour) diameter: 22.2 mm
• Cutting thickness (kerf): 1.8 mm
• Intended material: ferrous metals (steel and similar)
• Tool compatibility: angle grinders with 22.2 mm mounting

How to use

Mount the disc on a compatible angle grinder with a 22.2 mm spindle, ensuring the guard and flange are correctly fitted and tightened according to the grinder manufacturer's instructions. Check the disc for visible damage before use. Operate the grinder at the speed rating appropriate for the disc and the machine; avoid side grinding if the disc is not classified for that use. Make steady, controlled passes through the material without forcing the disc; allow the abrasive to cut at its designed rate. After use, let the disc come to a complete stop before setting the tool down and inspect the disc for wear or damage before subsequent use.

Usage recommendations

Always wear eye protection, hearing protection, and appropriate gloves and clothing. Use a guard and maintain a firm grip on the tool. Do not exceed the maximum RPM of the disc or the grinder, and avoid applications such as stainless steel or non-ferrous metals unless the disc is specified for those materials. Replace the disc if cracked, chipped, or excessively worn.