A curated selection of maximum value offers!
In cart {{totalProductsCount}} item(s)
Your cart is empty
SKYDANCE V1-H Controller 12–48V 1x 8A Push-Dimm for LED lighting
SKYDANCE V1-H is a constant-voltage LED controller for single-color lighting that operates from 12 to 48 V DC with one output channel rated at 8 A. It is designed for driving single-color LED strips, constant-voltage LED panels and similar fixtures, offering smooth dimming across 4096 levels and compatibility with RF 2.4 GHz remote controls. The compact unit fits behind a standard push switch and includes protections for reverse polarity and short circuits. Certified to CE, EMC and RoHS standards, it is intended for indoor, non-waterproof installations (IP20).
The controller provides high-resolution dimming (4096 gray levels) and a wide dimming range from 0 to 100% with a logarithmic curve for natural brightness transitions. Push-Dimm support lets you use a standard momentary (bell-type) wall switch, and RF 2.4 GHz compatibility enables single-zone or multi-zone remote control with up to ten paired remotes per receiver. An auto-transmitting function extends remote range by forwarding signals to another controller within 30 m, and PWM digital control ensures precise and flicker-free output. Built-in reverse-polarity and short-circuit protection improve installation safety.
Connect the controller to a 12–48 V DC supply and attach the single-color LED load to the output terminals, observing polarity. Pair the unit with an RF 2.4 GHz remote using the MATCH button, or connect a standard momentary (bell-type) switch to use Push-Dimm functionality. After connection, adjust brightness with the remote or the push switch; the device supports smooth fade on/off times up to 3 seconds. Ensure wiring follows the recommended cross-section (0.5–2 mm²) and install the controller in a dry indoor location behind a standard wall switch or inside an electrical box.
Use the SKYDANCE V1-H with dimmable, constant-voltage LED strips and fixtures only. Do not install in wet or outdoor locations due to IP20 rating. For reliable remote range and auto-transmit performance, allow clear line-of-sight or minimal obstructions between controllers and remotes. Verify total LED load does not exceed the rated current and power at the chosen voltage.
{{highlightedFeature.featureTitle}}:
{{getProductFeatureValueById(product, highlightedFeature.featureId)}}
{{ productComparisonGenerationError }}