AC/DC battery charger SKYRC S100 neo — supports LiPo/Li-Ion/LiFePO4/NiCd, 100–240V input, 4.5 cm display, 128×160 px, 12 A

SKYRC S100 neo is an AC/DC battery charger designed for hobbyists and workshop use. It supports LiPo, Li‑Ion, LiFePO4, NiCd, NiMH and lead‑acid (VRLA) batteries and accepts 100–240 V input at 50/60 Hz. The charger delivers up to 12 A charge current and features a 4.5 cm (1.77") color display with 128×160 px resolution mounted in a compact grey housing measuring approximately 105×105×62 mm. S100 neo combines higher charge current, enhanced balancing capability and quiet operation to suit everyday charging and maintenance tasks for RC packs and general batteries.

Advantages

S100 neo charges up to 12 A, offering noticeably faster charge times compared with earlier models that top out at lower currents. The device includes an improved balancing circuit with a high balancing current for faster and more accurate cell equalization, which helps maximize battery life and performance. A built‑in balance port allows faster discharging when used together with the main port, and the charger also provides on‑the‑fly cell voltage monitoring. The ColorX interface with a 128×160 px color display presents a clear, smartphone‑style menu for intuitive operation. The integrated fan keeps noise low even under load, enabling use in workshops or hobby rooms without creating significant disturbance.

Suitable for

• Charging and maintaining LiPo, Li‑Ion and LiFePO4 battery packs for RC models
• Balancing multi‑cell batteries during storage and after use
• Charging NiCd, NiMH and sealed lead‑acid batteries for general equipment and workshop tools
• Users who need faster charge cycles and higher balancing currents for frequent battery turnaround

Key specifications

• Input voltage: 100–240 V, 50/60 Hz
• Maximum charge current: 12 A
• Balance current: up to 1000 mA (per balancing channel performance)
• Discharge power: up to 20 W when balance port used with main port; reduced discharge when using main port only
• Display: 4.5 cm (1.77") color display, 128×160 pixels
• Supported chemistries: LiPo, Li‑Ion, LiFePO4, LiHV, NiMH, NiCd, Pb (VRLA)
• Housing dimensions (approx.): 105×105×62 mm
• Cooling: integrated fan with low noise operation (max ~48 dB under full load)

How to use

Connect the charger to an appropriate AC mains supply (100–240 V) or to a compatible DC source if required. Attach the battery to the main output and the balance connector to the balance port for multi‑cell lithium packs to enable balancing and cell monitoring. Select the correct battery chemistry, cell count and desired charge or storage mode from the ColorX menu, then set the required charge current up to the device maximum. Monitor the display for overall voltage and individual cell voltages during the process. For discharge or cycle operations, configure the function and confirm settings before starting.

Usage recommendations

Always verify battery type, cell count and health before charging. Use balance leads for multi‑cell lithium packs to enable proper balancing. Avoid unattended charging of damaged or swollen batteries and observe manufacturer limits for charge current and temperature. Ensure adequate ventilation around the charger to maintain the low‑noise fan performance and follow standard safety practices for handling rechargeable batteries.