Słowik NIGHTINGALE Floor Batten LN64 pos. 200 cm, height 80 mm, 1 vial, level, weight 850 g/m

Słowik NIGHTINGALE Floor Batten LN64 is a 200 cm long floor batten with an 80 mm profile height and an integrated single vial for leveling. Engineered for indoor floor preparation and renovation, the batten serves as a straight reference edge and screed guide that helps establish accurate horizontal planes. With a linear weight of 850 g/m the profile provides a balance of rigidity and manageable handling during installation and alignment tasks.

Advantages

The LN64 floor batten offers a rigid straight edge that resists bending while setting screed or leveling floors. The built-in vial supplies a clear horizontal reference without requiring a separate spirit level, improving workflow efficiency. At 200 cm length and 80 mm height the profile covers an extended working span and functions as a reliable screed guide for common room dimensions. The product’s weight per metre contributes to stability on the substrate while remaining light enough for single-person handling.

Suitable for

• Setting and guiding floor screeds in residential and commercial interiors
• Creating accurate horizontal reference lines during renovations
• Levelling subfloors before laying tiles, laminate, or parquet
• Temporary alignment and straight-edge work for plaster or mortar applications

Key specifications

• Length: 200 cm
• Profile height: 80 mm
• Number of vials: 1 (integrated horizontal vial)
• Linear weight: 850 g per metre
• Primary use: floor leveling and screed guiding
• Suitable environment: indoor installation and renovation work

How to use

Position the LN64 floor batten on the prepared substrate where a horizontal reference or screed guide is required. Use the integrated vial to adjust the profile until it reads level, then secure the batten in place by fixing or bracing according to the on-site method you employ (clips, screws, spacers or temporary supports). Run screed or mortar against the straight edge and use the batten as a guide when striking off. For multiple adjacent strips, align ends carefully to maintain a continuous level reference.

Usage recommendations

Check the vial calibration before starting work and re-verify after any impact; clean contact surfaces of debris to ensure stable seating; store the batten flat to avoid permanent deformation and handle with care to preserve the vial accuracy and straightness of the profile.