Drill Bit Smart SDS+ 5 mm for Concrete, MPN 17-05160

Smart SDS+ 5 mm concrete drill bit is designed for use with rotary hammers equipped with an SDS+ chuck. Intended for drilling into concrete and similar masonry materials, this masonry bit provides a compact 5 mm diameter suitable for light to medium drilling tasks in construction, renovation and installation work. The SDS+ shank enables fast, secure engagement with compatible tools and simplifies bit changes on the job.

Advantages

The solidly ground carbide tip and flute geometry deliver efficient drilling performance and reliable dust evacuation while working in dense materials. The standard SDS+ connection ensures compatibility with a wide range of rotary hammers and secures the bit during rotation and impact. Its 5 mm diameter offers a balance between precision and drilling speed for anchors, dowels and service penetrations.

Suitable for

• Drilling holes for anchors and plugs in concrete
• Creating service penetrations for pipes and cables in masonry
• Light to medium repair and renovation work on concrete and brick
• Installation tasks where a 5 mm hole diameter is required

Key specifications

• Shank type: SDS+
• Drill diameter: 5 mm
• Intended material: concrete and comparable masonry
• Tool compatibility: rotary hammers with SDS+ chuck
• Application range: light to medium drilling tasks

How to use

Fit the drill bit securely into the SDS+ chuck of a compatible rotary hammer according to the tool manufacturer's instructions. Mark the drilling point, use steady axial pressure and start drilling at low speed to establish the hole, then continue with regular hammering action suitable for masonry. Periodically withdraw the bit to clear dust and allow cooling; for deeper holes, clear debris more frequently. Follow safety guidelines: wear eye protection, hearing protection and a dust mask when working with concrete and masonry.

Usage recommendations

Use the 5 mm SDS+ bit for anchor and plug installation where a clean, correctly sized hole is required. For extended drilling sessions or very hard concrete, allow the bit to cool and inspect the carbide tip for wear; replace the bit when cutting performance decreases to avoid damage to the workpiece or tool.