Drill bit Smart SDS+ 6 mm model 17-06110 for hammer drills

Smart SDS+ 6 mm drill bit model 17-06110 is a rotary-percussion masonry bit designed for use with SDS+ hammer drills. With a 6 mm diameter cutting tip and a fluted body, this drill bit is intended for drilling into concrete, brick and other masonry materials. The SDS+ shank ensures secure fitting in compatible hammer drill chucks and efficient transfer of percussive energy for faster penetration in hard substrates.

Advantages

The drill bit combines a carbide-tipped cutting head for wear resistance with spiral flutes that efficiently remove dust and debris from the hole. Its SDS+ shank design provides stable connection and quick bit changes in hammer drills that accept SDS+ accessories. The 6 mm diameter offers a balance between compact hole size and drilling speed for light to medium masonry tasks.

Suitable for

• Drilling holes in concrete for anchor bolts and dowels
• Making fixture and bracket holes in brick and block walls
• General installation and repair work requiring percussive drilling
• Tasks where SDS+ compatibility is required for hammer drills

Key specifications

• Diameter: 6 mm
• Shank type: SDS+ compatible
• Intended use: Percussive drilling into masonry (concrete, brick, block)
• Tip material: carbide cutting tip for improved wear resistance
• Body: spiral flutes for debris removal

How to use

Insert the SDS+ shank into the hammer drill chuck until it locks, then select the hammer drilling mode on the tool. Position the drill bit perpendicular to the work surface and apply steady pressure while allowing the hammer action to perform the cutting. Withdraw the bit periodically to clear dust from the hole and avoid overheating. Use appropriate personal protective equipment such as safety glasses, hearing protection and dust mask when drilling masonry.

Usage recommendations

For best results, start with a pilot position and moderate feed pressure, and avoid excessive lateral forces that can damage the carbide tip. Match drill speed and hammer settings to the material: higher hammer action for hard concrete, lower settings for soft brick. Use a vacuum or brush to clear debris and check hole depth before installing anchors or fasteners.