Drill Bit Smart SDS+ 6 mm model 17-06210 for rotary hammers, carbide tip

Smart SDS+ 6 mm drill bit model 17-06210 is a precision tool designed for use with SDS+ rotary hammers. With a 6 mm diameter and a carbide tip, this drill bit is built to penetrate concrete, masonry and other similar building materials. The SDS+ shank ensures secure retention in compatible rotary hammers, delivering efficient power transfer for both professional tradespeople and DIY users who require hammer drilling performance and durability.

Advantages

The carbide tip provides enhanced wear resistance and sustained cutting performance when drilling into abrasive substrates such as concrete and brick. The SDS+ shank design enables quick insertion and secure locking in SDS+ rotary hammer chucks, reducing bit slippage and improving drilling stability. A 6 mm diameter offers a common size for a variety of anchor, dowel and fixing applications while keeping drill loads manageable for compact and medium-sized rotary hammers.

Suitable for

• Drilling holes for anchors and wall plugs in concrete and masonry
• Preparation of mounting points for light to medium fixtures
• General hammer drilling tasks on construction and renovation sites
• DIY projects requiring concrete or brick drilling

Key specifications

• Shank type: SDS+
• Diameter: 6 mm
• Tip material: carbide
• Intended materials: concrete, masonry and similar building materials
• Use mode: rotary hammer (hammer drilling)

How to use

Insert the SDS+ shank into the rotary hammer chuck until it locks, verify secure retention, and select the hammer drilling mode on the tool. Mark the drilling point and start drilling at low speed to establish a guide recess, then increase speed and apply steady pressure appropriate to the tool and material. Periodically retract the bit to clear dust from the hole and avoid overheating the carbide tip. Replace the bit if wear or damage impairs drilling performance.

Usage recommendations

For safe and effective results, use appropriate personal protective equipment such as eye protection, hearing protection and dust masks when drilling into concrete or masonry. Match the 6 mm hole size to compatible anchors and fixings, and avoid excessive lateral force to extend bit life.