Drill Bit Smart SDS+ 6 mm model 17-06260 for rotary hammer and masonry drilling

Smart SDS+ 6 mm drill bit model 17-06260 is designed for use with SDS+ rotary hammers to drill precise 6 mm holes in hard substrates such as concrete, masonry and brick. The SDS+ shank ensures secure, quick engagement with compatible rotary hammers and the cutting geometry is optimized for rotary and hammer drilling modes to maintain drilling accuracy and chip removal in dense materials.

Advantages

This 6 mm SDS+ bit offers reliable centering and consistent hole diameter when used in hammer or rotary mode. The SDS+ connection provides fast bit changes and stable retention under impact loads. The tip and flute profile are engineered to reduce clogging and to improve drilling speed while preserving the integrity of the hole edges in concrete and masonry.

Suitable for

• Drilling anchor and dowel holes in concrete and brick
• Through-holes for wiring and small-diameter conduits in masonry walls
• Installing fixtures where 6 mm hole diameter is required
• Professional trade work and DIY renovation tasks involving hard substrates

Key specifications

• Shank type: SDS+ compatible shank for rotary hammers
• Diameter: 6 mm suitable for standard 6 mm anchors and dowels
• Intended use: rotary and hammer drilling in concrete, masonry and brick
• Length: designed for typical medium-depth drilling tasks (check tool compatibility for required reach)
• Material and tip geometry: hardened steel construction with masonry-optimized tip and flute design for chip evacuation

How to use

Insert the SDS+ shank into the rotary hammer chuck until it locks. Select hammer or rotary mode according to the substrate and drilling depth; use hammer mode for concrete and dense masonry for faster penetration and rotary mode for delicate finishing near edges. Start drilling at low speed to establish the hole, then increase pressure and speed to maintain steady progress. Withdraw the bit periodically to clear debris from the hole and avoid overheating.

Usage recommendations

Use appropriate personal protective equipment including safety glasses, hearing protection and dust extraction or a mask when drilling in concrete or masonry. Verify drill and bit compatibility with the tool's SDS+ system and recommended speed/impact settings. For deep or prolonged drilling, cool and clear the bit regularly to maintain performance and prolong service life.