Drill bit Smart SDS+ 8 mm for concrete, model 17-08110

Smart SDS+ 8 mm concrete drill bit (model 17-08110) is designed for use with rotary hammers and hammer drills that accept SDS+ shanks. With an 8 mm working diameter, this drill bit is intended for drilling into concrete, masonry and other mineral-based materials. Its SDS+ shank provides secure engagement in the chuck and speeds up bit changes, making it suitable for both professional tradespeople and DIY users tackling anchor, dowel and fitting installations.

Advantages

The SDS+ shank ensures reliable retention and quick insertion and removal in compatible rotary hammers. The 8 mm diameter offers a balance between drilling speed and control for common fixing tasks such as anchors and dowels. The bit is hardened and ground to retain its cutting geometry during repetitive use in concrete and masonry. Compatibility with standard SDS+ chucks makes it easy to integrate into existing tool sets without adapters.

Suitable for

• Drilling anchor and dowel holes in concrete and masonry
• Installing fittings, brackets and wall plugs
• Light construction and renovation tasks
• Professional trades where SDS+ shank systems are used

Key specifications

• Working diameter: 8 mm
• Shank type: SDS+ compatible
• Intended materials: concrete, masonry and mineral substrates
• Typical applications: anchor holes, dowels, light fixing work

How to use

Select a rotary hammer or hammer drill with an SDS+ chuck, insert the bit until it locks in place and set the tool to the appropriate hammer drilling mode. Mark the drilling point and start at low speed to create a guide, then increase speed and apply steady pressure while allowing the tool to do the work. Periodically withdraw the bit to clear dust from the hole and prevent clogging. Use appropriate personal protective equipment such as safety glasses, hearing protection and dust mask when drilling concrete or masonry.

Usage recommendations

For best results, match drill diameter to recommended anchor or plug size, ensure the drill is set to hammer mode for concrete, and avoid excessive lateral force to prolong bit life. For deeper holes, withdraw the bit frequently to clear debris and reduce overheating.