Drill Bit Smart SDS+ 12 mm for Concrete, model 17-12600

Smart SDS+ 12 mm drill bit for concrete (model 17-12600) is a rotary hammer accessory designed for efficient drilling of 12 mm holes in concrete and masonry. The bit features an SDS+ shank for fast, secure seating in compatible rotary hammers and a carbide tip shaped for percussion drilling. It is intended for anchor, dowel and through-hole drilling during construction, installation and repair tasks where stable rotation and reliable impact transfer are required.

Advantages

The SDS+ shank ensures quick tool engagement and minimizes slippage during heavy-duty use. A carbide cutting tip provides wear resistance and consistent drilling performance in concrete and mineral materials. The bit's optimized flute design removes dust effectively from the hole, maintaining drilling speed and reducing overheating. Compact 12 mm diameter is suitable for common anchor and fastening applications without excess material removal.

Suitable for

• Drilling 12 mm holes in concrete and masonry for anchors and dowels
• Installation of fixtures, rails and supports requiring through-holes
• Construction site and renovation drilling with SDS+ rotary hammers

Key specifications

• Diameter: 12 mm
• Shank type: SDS+ compatible
• Tip material: carbide
• Suitable materials: concrete, masonry
• Intended use: rotary hammer percussion drilling for anchors and through-holes

How to use

Select an SDS+ rotary hammer with a compatible chuck and set it to hammer-drilling mode. Fit the drill bit into the tool until it locks in place. Mark the drilling point and start drilling at low speed to create a guide, then apply steady pressure and allow the hammer action to advance the bit into the material. Withdraw the bit periodically to clear dust from the hole and avoid excessive heat build-up. Use correct personal protective equipment including safety glasses, hearing protection and a dust mask when drilling.

Usage recommendations

For best results use in hammer-drilling mode on SDS+ rotary hammers and suitable drilling speeds for 12 mm diameter bits; avoid excessive lateral force, keep the bit straight during drilling and clear the hole of debris regularly to preserve cutting performance and extend tool life.