Drill bit for concrete Smart SDS+ 24 mm (model 17-24450)

Drill bit for concrete Smart SDS+ 24 mm is a carbide-tipped masonry bit designed for rotary and hammer drilling into concrete, stone and various masonry materials. The 24 mm diameter and robust SDS+ shank provide secure engagement with compatible SDS+ rotary hammers, enabling efficient drilling for anchor holes, through-holes and installation work on construction and renovation sites.

Advantages

The SDS+ shank ensures fast, tool-free bit changes and stable connection during hammering. A carbide cutting tip maintains sharpness and wear resistance when working with reinforced concrete and abrasive masonry. The 24 mm diameter allows drilling of standard anchor and fixing holes while the flute design evacuates dust and debris to support continuous drilling performance. The bit is balanced for straight drilling and reduced wobble in typical jobsite conditions.

Suitable for

• Drilling anchor holes in concrete and masonry
• Creating through-holes for pipes and conduits
• Installation of fixtures and fasteners in renovation and construction
• Work with reinforced concrete and solid stone

Key specifications

• Diameter: 24 mm
• Shank type: SDS+ compatible
• Tip material: carbide
• Intended use: rotary and hammer drilling into concrete, masonry and stone
• Design: flute for dust removal and stable drilling

How to use

Fit the SDS+ shank into a compatible rotary hammer according to the tool manufacturer's instructions until the bit locks securely. Select rotary or hammer mode as recommended for the material. Start drilling at low speed to establish the hole, then apply steady pressure and maintain a perpendicular angle to the surface. Withdraw the bit periodically to clear dust and prevent clogging of the flute when drilling deep holes. Allow the bit and tool to cool under heavy use and replace if excessive wear or damage is observed.

Usage recommendations

Use appropriate personal protective equipment such as eye protection, hearing protection and a dust mask. Match the drill bit diameter to the anchor or fixture size and verify compatibility with the rotary hammer's SDS+ system. Do not use the bit in percussion-free drill modes or in non-SDS chucks. Inspect the bit before use and avoid applying excessive lateral force to prolong service life.