Drill Bit Smart SDS+ 8 mm for Concrete, model 20-0800110

Drill Bit Smart SDS+ 8 mm for Concrete, model 20-0800110 is an SDS+ shank masonry drill bit designed for use with rotary hammer drills that accept SDS+ chucks. The 8 mm diameter is suitable for creating holes for standard wall anchors, dowels and fixings in concrete and other masonry materials. The bit's geometry and hardened cutting head are optimized for efficient concrete penetration while maintaining compatibility with SDS+ tool systems.

Advantages

The SDS+ design ensures secure tool engagement and easy bit changes in rotary hammer drills. A hardened carbide tip and appropriate flute geometry provide reliable drilling performance in concrete and block. The 8 mm diameter offers a balance between drill speed and hole strength for common fixing tasks, and the bit is suitable for both professional tradespeople and DIY users who require a robust masonry drilling solution.

Suitable for

• Drilling holes in concrete for wall anchors and dowels
• Fixing installations in masonry, block and reinforced concrete
• General construction and renovation tasks requiring 8 mm holes
• Use with rotary hammer drills equipped with SDS+ chucks

Key specifications

• Diameter: 8 mm
• Shank type: SDS+
• Intended materials: concrete, masonry
• Typical applications: anchor and dowel hole drilling
• Compatibility: rotary hammer drills with SDS+ chuck

How to use

Select a rotary hammer drill with an SDS+ chuck and secure the Drill Bit Smart SDS+ 8 mm by inserting the shank into the chuck until it locks. Mark the drilling point on the work surface, start drilling at low speed to create a pilot seat if needed, then apply steady pressure and run the hammer function for efficient penetration into concrete or masonry. Periodically withdraw the bit to clear debris from the hole and avoid excessive heat build-up. Use appropriate personal protective equipment, including eye protection, hearing protection and dust control measures.

Usage recommendations

For best results, match drill speed and hammer settings to the material density, avoid excessive lateral force, and replace the bit when the cutting performance noticeably declines. Use with compatible anchors and dowels sized for 8 mm holes and follow tool manufacturer guidelines for SDS+ rotary hammers.