Smart SDS+ 10 mm drill bit for concrete, model 20-1000160 is a purpose-built masonry drill designed for rotary and hammer drilling in concrete, brick and natural stone. The 10 mm diameter delivers accurate, consistent holes suitable for anchors, wall plugs and through-fixing. The SDS+ shank ensures fast, secure bit changes in compatible hammer drills and rotary hammers, while the fluted body evacuates dust to maintain cutting efficiency during extended use.
Advantages
The Smart SDS+ 10 mm drill bit features a reinforced carbide tip designed to penetrate hard substrates with reduced wear, providing longer service life compared with standard bits. Its SDS+ shank guarantees reliable retention in hammer drills and quick replacement, minimizing downtime on job sites. The flute geometry promotes efficient dust removal and cooling, helping to sustain drilling speed and accuracy over multiple holes.
Suitable for
- Drilling precise 10 mm holes in concrete and reinforced concrete
- Making anchor and dowel holes for fittings and fixtures
- Installation work in masonry, brickwork and natural stone
- Repair and renovation tasks requiring repeated hammer drilling
Key specifications
- Diameter: 10 mm
- Intended materials: concrete, masonry, natural stone
- Shank type: SDS+ compatible
- Tip material: carbide cutting tip
- Body feature: spiral flutes for dust evacuation
- Usage mode: rotary and hammer drilling
How to use
Use the Smart SDS+ 10 mm drill bit in an SDS+ compatible hammer drill or rotary hammer. Insert the shank into the tool’s chuck until it locks, select the hammer or rotary mode appropriate for the substrate, and start drilling at low speed to establish the position. Apply steady axial pressure without forcing the bit; allow the hammering action to do the work. Periodically withdraw the bit to clear dust from the hole and prevent overheating. For drilling through reinforced concrete, maintain alignment and increase feed gradually as required.
Usage recommendations
Wear appropriate eye, hearing and respiratory protection when drilling. Use a drill with appropriate power and hammer action for the substrate. For anchor installation, verify hole depth and clean the hole of dust before inserting the anchor or dowel.
