Drill Bit Smart SDS-plus Quattro 16x200/150 — Smart

The Drill Bit Smart SDS-plus Quattro 16x200/150 is a rotary and hammer drill bit designed for use with SDS-plus rotary hammers. It has a 16 mm diameter, a total length of 200 mm and a working length of 150 mm, and is intended for drilling into masonry and concrete. The quattro tip geometry improves dust removal and centring, increasing drilling efficiency and helping maintain a stable drill trajectory during use.

Advantages

The quattro tip design reduces jamming and enhances material evacuation, which shortens drilling time and reduces heat build-up. The SDS-plus shank enables quick, secure bit changes and reliable power transfer from compatible rotary hammers. The combination of a long overall length and a defined working length provides access to deeper boreholes while keeping the drilling zone predictable and controllable.

Suitable for

• Drilling holes in concrete for anchors and fixings
• Making openings in masonry and brickwork
• Preparing holes for rebar dowels and chemical anchors
• Professional construction and renovation tasks
• DIY projects requiring reliable concrete penetration

Key specifications

• Tip geometry: quattro design for improved cutting and dust ejection
• Shank type: SDS-plus for rotary hammer compatibility
• Diameter: 16 mm
• Total length: 200 mm
• Working (effective) length: 150 mm
• Material/application: engineered for masonry and concrete drilling

How to use

Install the SDS-plus shank into a compatible rotary hammer until it locks securely. Mark the drilling point and start at low speed to establish a precise pilot position, then apply steady pressure and increase hammer action as required for concrete or masonry. Periodically withdraw the bit to clear debris and allow cooling; for deeper holes, remove accumulated dust with a brush or compressed air to maintain drilling performance. Follow the rotary hammer manufacturer's guidance for optimal speed and force settings.

Usage recommendations

Use appropriate personal protective equipment—safety glasses, ear protection and a dust mask—when drilling. For reinforced concrete, check for rebar before drilling and use suitable techniques or bits if steel is present. Store the bit in a dry place and avoid excessive sideways force to extend service life.