Drill bit Smart SDS+ 16 mm for concrete, model 20-1600450

Smart SDS+ 16 mm concrete drill bit (model 20-1600450) is a rotary-percussive masonry bit designed for use with hammer drills that accept SDS+ shanks. With a 16 mm cutting diameter and an SDS+ connection, this drill bit is intended for drilling precise holes in concrete, reinforced concrete, brick and other masonry materials during construction, renovation and installation work.

Advantages

The bit’s SDS+ shank ensures secure, quick tool mounting and efficient power transfer for percussion drilling. Its 16 mm diameter provides a balance between hole size and drilling speed for fast anchor, dowel and conduit preparations. The tip geometry and flute design are optimized for chip evacuation and consistent drilling performance in dense materials. The steel construction and heat-resistant treatment increase wear resistance for repeated use in demanding masonry jobs.

Suitable for

• Drilling anchor and dowel holes in concrete and brick
• Preparing passages for electrical conduits and plumbing in masonry walls
• Renovation tasks that require new fixture or bracket installation on concrete surfaces
• General construction and light-to-medium-duty masonry drilling with SDS+ hammer drills

Key specifications

• Cutting diameter: 16 mm
• Shank type: SDS+
• Intended material: concrete, reinforced concrete, brick and masonry
• Drilling method: rotary-percussive (hammer drilling)
• Typical applications: anchor, dowel, conduit and fixture hole drilling

How to use

Secure the drill bit in the SDS+ chuck of a compatible hammer drill according to the tool manufacturer’s instructions. Mark the drilling point and start at low speed to locate the position, then apply steady pressure and allow the hammer action to perform the cutting. Use intermittent withdrawal to clear dust and chips from the hole and avoid excessive pressure that could overheat the bit. For deeper holes, periodically pull the bit out to remove debris and maintain drilling efficiency.

Usage recommendations

Use appropriate personal protective equipment, including eye protection, hearing protection and dust mask. For reinforced concrete, consider using a pilot or carbide-tipped bit and reduce feed force when encountering rebar. Match drill speed and hammer setting to the material hardness and hole diameter for optimal bit life and hole quality.