Diamond Cutting Disc Smart365 grindcut GC1 125 mm for angle grinders, model 10-125GC1

Diamond cutting disc Smart365 grindcut GC1 125 mm (model 10-125GC1) is a 125 mm diameter blade designed for angle grinders. The disc has a continuous diamond cutting edge intended for cutting hard construction materials such as concrete, natural stone and ceramic tiles. It is suitable for both straight and plunge cuts and is engineered to deliver consistent cutting performance during renovation and installation tasks.

Advantages

The diamond edge provides extended life and improved cutting speed compared with conventional abrasive discs, while the 125 mm diameter offers a balance of cutting depth and control for handheld angle grinders. The construction minimizes chipping on fragile tiles and helps maintain a straight cutting line when used with steady technique. The disc is compatible with standard 125 mm angle grinder flanges and is optimized for use on building materials.

Suitable for

• Cutting concrete and cement-based products
• Trimming and shaping natural stone
• Cutting ceramic and porcelain tiles for flooring and wall installation
• Plunge cuts and straight cuts in renovation and construction work

Key specifications

• Diameter: 125 mm
• Cutting edge: continuous diamond segment
• Intended tool: handheld angle grinders (125 mm discs)
• Typical cutting depth: suitable for shallow to medium-depth cuts consistent with 125 mm discs
• Primary materials: concrete, natural stone, ceramic and porcelain tiles

How to use

Mount the disc on a compatible 125 mm angle grinder following the grinder manufacturer's instructions and ensure the flange and locking nut are secure. Use appropriate personal protective equipment including eye, ear and respiratory protection. For best results, allow the grinder to reach full speed before engaging the material and use steady, controlled movements; for tiles or brittle materials, consider a shallow approach and reduce feed pressure to minimise chipping. When making plunge cuts, start with a shallow entry and increase depth gradually if the disc and tool allow.

Usage recommendations

Use water suppression only if the disc and angle grinder are rated for wet cutting; otherwise use dry cutting with intermittent operation to avoid overheating. Inspect the disc for damage before each use and replace it if segments are missing or the cutting edge is excessively worn. Store the disc in a dry, stable environment away from direct sunlight to preserve its bonding and cutting performance.