Abrasive mesh sheets Sourcing MIRKA ABRANET 81x133 mm P400, pack 100

Sourcing MIRKA ABRANET abrasive mesh sheets, size 81×133 mm with P400 grit, are designed for fine sanding tasks where efficient dust extraction and consistent finish are required. The open mesh construction allows dust to pass through to a compatible dust extraction system, reducing clogging and maintaining abrasive performance. Supplied in a pack of 100, these sheets fit positional backing pads and sanding tools that accept the Mirka Abranet format and are suitable for use on wood, painted surfaces, primers and fillers in workshop and automotive refinishing environments.

Advantages

The open mesh design provides effective dust extraction and reduced clogging compared with closed-paper abrasives, prolonging service life and improving sanding consistency. P400 grit delivers a fine abrasive action appropriate for feathering edges, smoothing filler and preparing painted or primed surfaces for subsequent coatings. The standardized 81×133 mm size ensures compatibility with positional pads and handheld tools built for Abranet-style mesh sheets, while the pack quantity supports extended use in professional or busy workshop settings.

Suitable for

• Fine sanding of wood surfaces prior to finishing
• Smoothing and blending paint, primer and filler in automotive refinishing
• Preparation of surfaces for repainting or clearcoat application
• Use with positional backing pads and Mirka Abranet-compatible sanding tools

Key specifications

• Grit: P400 (fine)
• Sheet dimensions: 81 × 133 mm
• Construction: open abrasive mesh for dust through-flow
• Pack size: 100 sheets per pack
• Suitable substrates: wood, paint, primer, filler

How to use

Select a positional backing pad or sanding tool compatible with Abranet-style mesh sheets and attach the 81×133 mm sheet securely. Use moderate, even pressure and move the sander or pad along the workpiece in overlapping strokes. Connect an appropriate dust extraction system where possible to take advantage of the open mesh construction and reduce airborne dust. Replace sheets when the abrasive performance declines or if damage to the mesh occurs.

Usage recommendations

For best results on painted and primed surfaces, begin with light passes using the P400 mesh to blend imperfections and feather edges, then inspect the surface under good lighting before proceeding to primer or topcoat. Use consistent motion and compatible dust extraction to maximize sheet life and maintain a clean working environment.