Audio extension cable Sourcing Swissten Textile 3.5 mm male to 3.5 mm female, 1.5 m

The Audio extension cable Sourcing Swissten Textile 3.5 mm male to 3.5 mm female, 1.5 m is a textile-sheathed audio lead designed to extend the reach of standard 3.5 mm TRS headphones and audio devices. With a length of 1.5 metres and a male-to-female 3.5 mm connection, it enables a flexible, low-profile extension between headphones, portable players, phones, car stereos and home audio systems. The textile outer layer gives the cable a fabric feel that resists tangling and improves handling compared with a bare plastic sheath.

Advantages

This extension cable provides a simple and reliable way to increase cable length without changing audio connectors or adapters. The 3.5 mm TRS male and female connectors maintain a standard stereo connection, while the textile sheathing reduces cable twist and abrasion during regular use. Its compact connectors and 1.5 m length make it suitable for short extensions where signal integrity and convenience are priorities.

Suitable for

• Extending wired headphone or earphone leads for more freedom of movement
• Connecting portable music players or phones to car or home stereos
• Temporary audio setups during travel, meetings or small events
• Desktop setups where the original cable does not reach the audio input

When it may not be suitable

This cable is not intended for balanced audio connections or professional studio use where XLR or TRS balanced lines are required; it provides an unbalanced stereo signal via standard 3.5 mm TRS connectors. It may also be unsuitable where very long cable runs are needed, as longer unbalanced runs can degrade audio quality or pick up interference.

Key specifications

• Connector type: 3.5 mm male to 3.5 mm female (stereo TRS)
• Cable length: 1.5 m
• Sheath: textile fabric outer layer for reduced tangling
• Compatibility: devices with standard 3.5 mm stereo jacks (phones, laptops, MP3 players, car and home stereos, headphones)
• Use case: unbalanced stereo audio extension

How to use

Insert the 3.5 mm male plug into the audio output of the source device and connect headphones or the receiving device to the 3.5 mm female socket. Ensure both connectors are fully seated to avoid intermittent contact. Route the textile-sheathed cable to avoid sharp bends or pinching; the fabric layer improves handling but standard cable care prevents damage and maintains signal quality.

What to consider before purchase

• Confirm your devices use a standard 3.5 mm stereo (TRS) jack
• Assess whether 1.5 m provides sufficient extension for your setup
• For balanced, professional or very long runs, consider dedicated balanced cables or adapters

Usage recommendations

For best results, use this Sourcing Swissten Textile extension for short to medium unbalanced stereo connections, avoiding tight coils and prolonged stress at connector points. Disconnect gently by pulling the plug rather than tugging the cable to prolong service life.