Leave your address - as soon as the price of the product goes down, you'll know about it right away
LED power supply Sourcing LPV-100-24 single output 24V 4.2A
LED power supply Sourcing LPV-100-24 single output 24V 4.2A
In cart {{totalProductsCount}} item(s)
Your cart is empty
LED power supply Sourcing LPV-100-24 single output 24V 4.2A
Leave your address - as soon as the price of the product goes down, you'll know about it right away
LED power supply Sourcing LPV-100-24 single output 24V 4.2A
LED power supply Sourcing LPV-100-24 single output 24V 4.2A
Sourcing LPV-100-24 is a single-output LED power supply that provides a regulated 24V DC output with a maximum current of 4.2A. It is intended for powering LED strips, modules and other low-voltage lighting loads in indoor environments. The compact fixed-output design delivers stable voltage for consistent illumination and is suitable for installations where a reliable constant-voltage driver is required.
The power supply offers a compact form factor and simple fixed 24V output that simplifies wiring and installation. Built to the conventions of LED drivers in its class, it provides stable voltage under typical load conditions and basic protection features that help prevent damage from common electrical faults. Its single-output configuration reduces complexity in systems that require only one voltage rail.
Mount the power supply in a location with adequate ventilation and away from direct moisture. Connect the AC input to a correctly rated mains supply following local electrical codes, and connect the 24V DC output to the LED load ensuring correct polarity. Verify total load current does not exceed 4.2A and that the combined wattage of connected LED fixtures remains within the power supply's rated capacity. After connections are secured, apply mains power and confirm stable illumination and correct operation.
Select cable sizes appropriate for the output current to minimize voltage drop, and avoid overloading by leaving a safety margin below the maximum rated current. For long cable runs or sensitive LED installations, measure voltage at the load and, if necessary, use thicker conductors or place the driver closer to the fixtures. Follow local regulations for fixed electrical installations and consider additional surge or inrush protection if the installation environment requires it.
{{highlightedFeature.featureTitle}}:
{{getProductFeatureValueById(product, highlightedFeature.featureId)}}