LED power supply Sourcing LPV-150-24, single output 24V 6.3A, enclosed switching driver

Sourcing LPV-150-24 is an enclosed switching LED power supply that provides a stable 24 V DC output with a maximum current of 6.3 A and a rated output power of 150 W. The unit is designed for constant-voltage applications and is suitable for powering LED strips, LED modules and various low-voltage lighting fixtures where a regulated 24 V source is required. Its compact enclosed design supports indoor installations and use in signage, display lighting and other controlled environments.

Advantages

The enclosed switching design delivers efficient power conversion with consistent voltage regulation, reducing the risk of flicker and uneven illumination. Built for continuous operation, the driver provides overload and short-circuit protection features commonly found in enclosed LED supplies. The combination of 24 V constant-voltage output and 150 W capacity enables reliable operation of medium-length LED strip runs and multiple LED modules from a single supply.

Suitable for

• Indoor LED strip installations
• LED modules and accent lighting
• Signage and display backlighting
• Architectural and cabinet lighting requiring 24 V DC

Key specifications

• Output voltage: 24 V DC constant-voltage
• Maximum output current: 6.3 A
• Rated output power: 150 W
• Enclosed switching driver form factor suitable for indoor mounting
• Protection features: overload and short-circuit protection (built-in)

How to use

Mount the power supply in a well-ventilated indoor location, avoiding direct exposure to moisture and excessive heat. Connect the AC input to an appropriate mains supply using the designated terminals and secure the DC 24 V output to the LED load following polarity markings. Verify total LED load does not exceed the 150 W rating and account for voltage drop on long runs of strip by placing the supply close to the load or using parallel runs. After wiring, power up and confirm stable 24 V output and correct operation of connected LED fixtures.

Usage recommendations

For reliable operation, keep the unit in a dry, ventilated space and ensure the connected LED load stays within the 150 W limit. If powering long lengths of LED strip, consider additional feed points or a higher-power supply to reduce voltage drop and maintain uniform brightness.