Fire emergency power cut manual push button Spamel PWP1 (1NC) with CNBOP certificate, 2LED green/red, 230V

The Spamel PWP1 manual push button is a fire emergency power cut device designed for manual disconnection of electrical supply in emergency situations. Featuring a single normally closed contact (1NC) and dual indicator LEDs (green and red), the unit operates at 230V and is delivered with CNBOP certification for compliance with applicable fire safety requirements. The compact construction and clear visual indication make it suitable for integration into alarm systems, emergency shutdown circuits and building fire protection installations.

Advantages

The Spamel PWP1 provides a reliable, single-contact solution for manual power isolation during fire incidents. Built for straightforward installation and visible status indication via green and red LEDs, it supports quick identification of circuit state. The device’s CNBOP certification confirms conformity with recognized fire safety standards. Its 230V rating matches standard building supply voltages, enabling direct use in common electrical and safety circuits without additional converters.

Suitable for

• Manual emergency shutdown of mains power in commercial and residential buildings
• Integration into fire alarm and detection systems for manual intervention
• Use in emergency power cut circuits for machine halls, technical rooms and plant installations
• Installation in escape routes and control rooms for local isolation of circuits

Key specifications

• Contact configuration: single normally closed contact (1NC)
• Supply voltage: 230 V AC
• Indicator: dual LEDs — green and red for visual status
• Function: manual push-button for emergency power cut
• Certification: CNBOP certified for fire safety applications
• Mounting: panel or wall mounting compatible with standard electrical enclosures

How to use

Install the Spamel PWP1 in an accessible location within the protected area where manual disconnection may be required. Connect the device into the emergency shutdown circuit following applicable wiring diagrams and national electrical codes, ensuring the 230V supply and load conductors are properly terminated to the normally closed contact. In normal operation the contact remains closed, allowing power to flow. In an emergency, operate the push button to open the contact and interrupt the circuit; LED indicators show the device status. After use, reset or restore the circuit according to site procedures and verify correct operation of the LEDs and contact before returning the system to service.

Usage recommendations

Use the Spamel PWP1 as part of a complete fire safety strategy. Position the device in clearly marked, unobstructed locations and test it periodically as part of routine safety inspections. Ensure wiring and installation are performed by qualified personnel and comply with local regulations to maintain certification validity and safe operation.