3D printing filament Spectrum TF-24005 — Polylactic acid (PLA), Red, 1.75 mm, 1 kg

Spectrum TF-24005 is a 1 kg spool of red Polylactic acid (PLA) filament in 1.75 mm diameter designed for FDM/FFF 3D printers. The filament is formulated for general-purpose use: prototyping, hobby parts and visual models. PLA is characterised by low warping and reliable layer adhesion, allowing consistent extrusion at temperatures typical for PLA printing. The spool is compatible with printers that accept 1.75 mm filament and is intended for standard desktop 3D printing workflows.

Advantages

The PLA material provides dimensional stability and low shrinkage during cooling, reducing the need for heated beds or extensive enclosure control. Good interlayer bonding yields smooth surfaces and reliable detail reproduction. The red pigment delivers consistent colour across prints and is suitable for visible parts and mock-ups. The 1.75 mm diameter ensures wide compatibility with common extruders and feeding systems.

Suitable for

• Prototyping functional mock-ups and concept models
• Hobbyist parts, figurines and decorative objects
• Visual models, display pieces and colour-critical applications
• Educational projects and classroom 3D printing

Key specifications

• Material: Polylactic acid (PLA)
• Colour: Red
• Diameter: 1.75 mm
• Net weight: 1 kg spool
• Form: Single filament spool for FDM/FFF printers

How to use

Load the 1.75 mm filament into a compatible extruder following your printer manufacturer’s instructions. Recommended printing temperatures for PLA typically range from 190–220 °C; start near the midpoint and adjust according to flow and layer adhesion. For most models, a heated bed set to 40–60 °C or no heated bed is acceptable; use adhesion aids if required. Ensure the filament is dry before printing and feed the filament smoothly to avoid jams. After printing, allow parts to cool before removal to minimise deformation.

Usage recommendations

Store unused filament in a dry environment or sealed container with desiccant to maintain print quality. Use moderate print speeds and layer heights appropriate to nozzle size to balance detail and strength. Avoid prolonged exposure to high humidity to prevent poor extrusion and surface defects.