Scratch gauge STANLEY Styrete Marking Gauge, plastic, black/yellow, length 215 mm

STANLEY Styrete Marking Gauge is a compact plastic scratch gauge designed for layout and marking tasks in carpentry, joinery and general workshop work. With a 215 mm stem and a black and yellow body, this gauge provides a fixed reference for scribing lines and marking materials prior to cutting or fitting. The stem is calibrated for quick setting and the plastic stock includes a metal insert to improve abrasion resistance during repetitive use.

Advantages

The gauge combines a lightweight plastic stock with a metal insert to enhance durability where the tool contacts surfaces. A calibrated stem enables accurate and repeatable settings, and dual graduations—2 mm on one side and 16ths of an inch on the reverse—support both metric and imperial marking. Its compact 215 mm length makes it easy to handle and store while maintaining stable reference lines for consistent results.

Suitable for

• Marking lines on wood for cutting and joinery
• Scribing reference lines for cabinet and furniture work
• Layout checks and repetitive workshop marking
• Small-scale metal or plastic marking where a scratch gauge is required

Key specifications

• Overall length: 215 mm
• Body material: plastic with metal insert for abrasion resistance
• Stem: calibrated for easy setting
• Graduations: 2 mm on one side, 16ths of an inch on the reverse
• Color: black and yellow

How to use

Place the stock of the marking gauge against the edge of the workpiece and adjust the calibrated stem to the required distance from the edge. Tighten the locking mechanism or position the gauge so it maintains the set measurement, then draw the gauge along the workpiece to scribe a consistent reference line. For repetitive marks, recheck the stem calibration before each run to ensure accuracy. Use the side with metric graduations for metric measurements and the reverse side for imperial measurements as needed.

Usage recommendations

Keep the metal insert clean and free of debris to reduce wear. Use light, steady pressure when scribing to avoid deep gouges; for delicate surfaces, test on a scrap piece first. Store the gauge in a dry place to prevent damage to the stem calibration and to maintain reliable performance.