STANLEY spade drill bit 1 pc, 18 mm diameter, model STA52030

STANLEY spade drill bit STA52030 is a single 18 mm flat drill designed for fast, efficient boring in softwoods and similar workpiece materials. The blade-style profile removes material quickly while the centering point provides guided starts to reduce walking when beginning holes with handheld drills or drill drivers. This spade bit is intended for straightforward woodworking tasks and rough electrical or plumbing installations where rapid hole-making is required.

Advantages

The flat spade geometry enables rapid chip evacuation and faster drilling compared with twist bits of similar size, reducing cycle time on repetitive tasks. The integrated centering point improves accuracy at the start of the hole and helps keep the bit aligned without the need for pilot holes. Made to STANLEY quality standards, the bit is supplied as a single piece for easy replacement and clear inventory control.

Suitable for

• Drilling through softwood and construction timber
• Creating access holes for electrical wiring and conduit
• Making openings for plumbing pipes and fittings
• General rough carpentry and framing work

Key specifications

• Type: Spade (flat) drill bit
• Cutting diameter: 18 mm
• Intended materials: Wood and similar soft materials
• Quantity: 1 piece
• Shank style: Standard round shank for handheld drills

How to use

Install the spade bit securely in the drill chuck and tighten according to the drill manufacturer's instructions. Mark the drilling position and, if needed for precision, use a center punch or starter mark to assist the centering point. Apply steady, moderate pressure and run the drill at an appropriate speed for wood—typically medium to high—allowing the bit to cut without excessive force. Withdraw periodically to clear chips when drilling deep holes, and finish the hole with a clean pass if a smoother edge is required.

Usage recommendations

Use personal protective equipment such as safety glasses and hearing protection. Avoid forcing the bit; let the cutting edge perform the work. For harder or laminated woods, consider using a bit specifically designed for those materials or reduce speed to prevent burning and premature wear.