Drill bit STANLEY STA52041 — 1.2 cm diameter, 155 mm length, 1 piece

STANLEY STA52041 drill bit is a single-piece drilling accessory with a 1.2 cm diameter and a total length of 155 mm. Designed for general drilling tasks, this bit is compatible with standard drill chucks and intended for use on materials such as wood and laminate, and is suitable for workshop, maintenance and construction applications where a mid-length bit is required.

Advantages

The 1.2 cm diameter and 155 mm length provide a balance between reach and rigidity for mid-depth holes. Supplied as a single unit, the bit is easy to replace or keep as a spare. Its geometry and dimensions are suitable for typical hand and powered drills, offering straightforward performance for through-holes and pilot holes in wood and laminate.

Suitable for

• Drilling holes in wood and timber components
• Creating openings in laminate surfaces
• General repair, maintenance and workshop tasks
• Use as a replacement or spare bit for construction sites

Key specifications

• Diameter: 1.2 cm
• Length (total): 155 mm
• Quantity in pack: 1 piece
• Compatible with standard drill chucks
• Intended materials: wood, laminate

How to use

Select a drill with a compatible chuck and secure the STANLEY STA52041 bit tightly in the chuck according to the drill manufacturer's instructions. Mark the drilling location, set an appropriate drilling speed for the material (lower speeds for harder materials, higher for softer wood and laminate), and apply steady pressure while keeping the drill aligned perpendicular to the work surface. Withdraw the bit periodically for deep holes to clear chips and reduce heat buildup.

Usage recommendations

Use appropriate personal protective equipment such as safety goggles and hearing protection. For clean finishes in laminate, consider using a backing board to reduce tear-out. Keep the bit sharp and replace when wear or damage affects hole quality.