Spade Drill Bit STANLEY 5287973 — 32 mm diameter, 1 pc

STANLEY 5287973 spade drill bit with a 32 mm cutting diameter is a single-piece accessory designed for drilling larger holes in wood and wood-based materials. The bit mounts in standard drill chucks and is suitable for both manual and power drilling applications where rapid removal of wood material is required. Its flattened paddle-shaped tip concentrates cutting action while the center point ensures guided entry and consistent hole placement.

Advantages

The spade shape enables fast chip evacuation and efficient material removal when producing 32 mm holes. Constructed to provide a stable drilling experience in soft to medium-density timber, this single-piece bit simplifies hole-making tasks without the need for stepped or annular cutters. Compatibility with common drill chucks makes it a practical choice for on-site carpentry and general construction work.

Suitable for

• Drilling through solid wood, plywood and chipboard
• Creating openings for electrical cable routing and conduits
• Carpentry and joinery hole-making for fittings and fasteners
• General construction and renovation tasks requiring 32 mm holes

Key specifications

• Type: Spade (paddle) drill bit
• Cutting diameter: 32 mm
• Quantity: 1 piece
• Material compatibility: Wood and wood-based panels
• Mounting: Fits standard drill chucks

How to use

Secure the spade drill bit in the drill chuck and tighten firmly. Mark the drilling point and start drilling at low speed to establish the center before increasing to an appropriate speed for the wood type. Apply steady, even pressure and allow the bit to clear chips periodically to avoid clogging. When drilling through thin panels, support the workpiece to reduce tear-out on the exit side. After use, remove wood debris from the bit and store it dry to reduce corrosion.

Usage recommendations

For cleaner entry and exit holes in finished surfaces, use a sacrificial backing board and clamp the workpiece. When drilling dense hardwoods, reduce speed and use controlled feed to minimise burning and prolong the bit's life. Wear appropriate eye and hearing protection while operating power drills.