Drill Bit STANLEY 8 x 154 mm paddle bit STA52090-QZ for wood drilling

Drill Bit STANLEY 8 x 154 mm paddle bit STA52090-QZ for wood drilling is a flat-bladed paddle bit engineered for rapid and accurate through-holes in wood and wood-based materials. With an 8 mm cutting diameter and a 154 mm overall length, this paddle bit is intended for tasks that require clean, straight holes and efficient chip evacuation. The design is compatible with handheld drills and bench-mounted drilling machines commonly used in carpentry and installation work.

Advantages

The paddle geometry enables fast material removal and clear chip ejection, reducing clogging and improving drilling speed. A centering point helps start holes accurately without excessive walking, while the flat blade maintains consistent hole diameter. The bit’s length permits drilling deeper sections through boards, panels or stacked materials. Its construction provides reliable performance for repetitive wood-drilling operations.

Suitable for

• Drilling through solid wood, softwood and hardwood
• Installing door hardware, locks and fittings
• Through-holes in plywood, MDF and particleboard
• Carpentry, joinery and general woodworking tasks
• Use with handheld drills and drill presses

Key specifications

• Cutting diameter: 8 mm
• Overall length: 154 mm
• Blade type: flat paddle design for chip removal
• Tip: centering point for accurate starts
• Material compatibility: wood and wood-based panels

How to use

Secure the paddle bit in the drill chuck so the shank is seated fully and centered. Mark the drilling point on the workpiece and, if possible, clamp the material to prevent movement. Start drilling at low speed to allow the centering point to register, then increase speed steadily while applying even pressure. Withdraw the bit periodically for long holes to clear chips and avoid overheating. For bench drilling, align the workpiece and use the press feed to maintain a consistent feed rate.

Usage recommendations

Use appropriate personal protective equipment such as safety glasses and hearing protection. For cleaner holes in delicate veneers or laminated surfaces, consider backing the workpiece to reduce tear-out. Keep the bit sharp and free of resin build-up for best performance; remove pitch with suitable solvents when necessary.