Drill bit STANLEY STA53100 6.5 mm x 100 mm, 1 pc

STANLEY STA53100 6.5 mm x 100 mm drill bit is a single-piece metal accessory intended for general-purpose drilling where a 6.5 mm hole is required. The 100 mm overall length provides sufficient reach for many workshop and construction tasks. Designed for use with standard drills, this drill bit is supplied as one unit for replacement or occasional jobs.

Advantages

The drill bit combines a standard 6.5 mm diameter with a 100 mm length to cover common drilling needs without excess bulk. Its one-piece supply makes it convenient to store and replace, and the geometry is designed for effective cutting in specified materials. The bit is compatible with typical drill chucks and offers straightforward installation and removal.

Suitable for

• Drilling 6.5 mm holes in masonry and stone
• Repair and maintenance tasks in construction
• Occasional workshop drilling where a single spare bit is required

Key specifications

• Diameter: 6.5 mm
• Overall length: 100 mm
• Intended materials: masonry, stone
• Quantity: 1 piece

How to use

Secure the drill bit firmly in the drill chuck and tighten according to the drill manufacturer's instructions. Position the bit perpendicular to the work surface, apply steady pressure, and start drilling at low speed to create a pilot groove, then increase speed as appropriate for the material. Use appropriate personal protective equipment such as safety glasses and a dust mask when working with masonry or stone. After use, clean the bit of debris and store it in a dry place to prevent corrosion.

Usage recommendations

Use the drill bit with a rotary drill suitable for masonry work and select drilling speed and feed pressure according to the type of stone or masonry. For prolonged work, periodically withdraw the bit to clear dust and reduce heat buildup.