Drill bit STANLEY STA53120 — 10 mm x 120 mm, single piece

STANLEY STA53120 drill bit — single 10 mm x 120 mm bit engineered for standard drilling tasks in masonry. This single-piece drill bit is intended for use with compatible hand or power drills to create clean 10 mm holes. With a 120 mm overall length it provides adequate penetration depth for common repair, construction and DIY applications where masonry drilling is required.

Advantages

The 10 mm diameter offers compatibility with typical fixings and anchors used in masonry work. At 120 mm length the bit gives sufficient reach while remaining easy to handle and change in drill chucks. Being a single-piece supply simplifies selection when a single precision diameter is needed for anchoring or through-holes in brick, concrete or similar substrates.

Suitable for

• Drilling 10 mm holes in brick
• Installing wall anchors in concrete
• General repair and renovation tasks involving masonry
• Light construction and DIY mounting jobs

Key specifications

• Diameter: 10 mm
• Overall length: 120 mm
• Intended material type: masonry
• Pack quantity: 1 piece

How to use

Mount the STANLEY STA53120 drill bit securely in a compatible hammer or rotary drill chuck according to the drill manufacturer’s instructions. Select an appropriate drill mode and speed for masonry, typically hammer mode with moderate to high speed. Mark the drilling point, apply steady pressure and start drilling; withdraw periodically to clear dust and allow the bit to cool. Choose proper personal protective equipment such as eye protection and a dust mask when drilling masonry.

Usage recommendations

Use with a drill rated for masonry and select correct anchor or fixing for a 10 mm hole. For deeper or reinforced concrete, consider pilot holes or specialized bits. Keep the bit clean from debris and replace when wear affects performance.