Drill bit STANLEY STA58007 — 10 mm diameter, 120 mm length, single piece

Single STANLEY STA58007 drill bit with a 10 mm diameter and 120 mm overall length. This single-piece drill bit is designed for basic drilling operations and is intended for use with compatible hammer or rotary drills to create 10 mm holes up to the full 120 mm length. It is supplied as one unit and is suitable for tasks that require a straightforward, general-purpose masonry drilling solution.

Advantages

The 10 mm diameter and 120 mm length provide a balance between reach and rigidity for standard masonry work. Manufactured by STANLEY, the bit is sized to match common drill chucks and delivers consistent hole diameter for anchoring, dowelling, and fixture installation. Supplied as a single piece, it allows users to replace worn bits individually and keep an appropriate spare on hand without purchasing multi-packs.

Suitable for

• Drilling 10 mm holes in masonry walls and concrete blocks
• Preparing anchor or plug holes for fixtures and fittings
• General-purpose site or DIY drilling tasks requiring up to 120 mm depth

Key specifications

• Diameter: 10 mm
• Total length: 120 mm
• Material compatibility: masonry
• Quantity: 1 piece

How to use

Fit the drill bit securely into a drill chuck rated for the bit diameter, ensuring the drill is compatible with masonry bits. For masonry, use a hammer or percussion mode if available and select an appropriate drill speed. Mark the drilling point, apply steady pressure, and drill until the desired depth is reached. Withdraw the bit periodically to clear dust and debris, and replace the bit when wear affects drilling performance or hole accuracy.

Usage recommendations

Use appropriate personal protective equipment such as safety glasses and a dust mask when drilling masonry. Select anchors or plugs that match the 10 mm hole diameter and consider pre-drilling pilot holes in tiles or thin materials to avoid cracking. Store the bit dry and clean to prevent corrosion and inspect before use to ensure cutting edges are intact.